2008 Nissan 350Z

2008 Nissan 350Z wheel fitment at a glance

This 2008 Nissan 350Z is running Rays-Engineering 57cr in Black in 18x9.5 +12 at all four corners, wrapped in 255/35R18 Federal SS595 tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Nissan 350Z wheel fitment, Rays-Engineering 57cr on a Nissan 350Z, 18x9.5 +12 wheels on a 350Z, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Rays-Engineering 57cr 18x9.5 +12 specs

The wheels are 18-inch in diameter and 9.5 inches wide with a +12 offset.

A +12 offset on a 9.5-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Rays-Engineering 57cr 18x9.5 +12 on a Nissan 350Z is a common 350Z question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/35R18 tires on 18x9.5 wheels

The tire size is 255/35R18: a 255 mm section width with a 35 aspect ratio on the 18-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Federal SS595. We stock Atlas Force UHP 255/35R18 94Y - 221017366 at $99 each in this size, and other 255/35R18 tires through the 255/35R18 tire search.

Searching for 255/35R18 tires on a Nissan 350Z, or the right tire size for 18x9.5 +12 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 18x9.5 +12 and get the flush look.

No rubbing at all, front or rear, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Nissan 350Z comes down to the offset and width above; copy them and you get the same result.

Will 18x9.5 +12 fit a Nissan 350Z?

Will Rays-Engineering 57cr 18x9.5 +12 fit a 2008 Nissan 350Z? This owner's answer is yes, on coilovers, with no rubbing.

6 other Nissan 350Z builds in the gallery run sizes like 19x10.5 / 19x11.5, 19x9.5 / 19x10, 18x13 / 18x14, 19x13, 18x10, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2008 Nissan 350Z: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan 350Z

Rays-Engineering 57cr is not something we carry today. For the same look on your 350Z, browse wheels that fit the 2008 Nissan 350Z in 18-inch sizes near +12 offset; the Nissan 350Z wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2008 Nissan 350Z wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan 350Z and size before you order, and add your own ride once it is done so the next owner can see what fits.