2004 Nissan 350Z

2004 Nissan 350Z wheel fitment at a glance

This 2004 Nissan 350Z is running Work Wheels VS-SS, staggered: 18x13 -29 up front and 18x14 -42 in the rear, wrapped in 315/30R18 front and 335/30R18 rear Toyo Proxes R888R tires.

It sits on stock suspension with a poke stance, meaning the wheels stick out past the fender.

If you are searching for Nissan 350Z wheel fitment, Work Wheels VS-SS on a Nissan 350Z, 18x13 -29 wheels on a 350Z, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels VS-SS 18x13 -29 specs (staggered)

The wheels are 18-inch in diameter and 13 inches wide with a -29 offset up front, and 18-inch by 14 inches at -42 in the rear.

A -29 offset on a 13-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear -42 offset on the 14-inch wheel pushes the rear out further for the staggered look.

Work Wheels VS-SS 18x13 -29 on a Nissan 350Z is a common 350Z question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

315/30R18 / 335/30R18 tires on 18x13 wheels

The tire size is 315/30R18 front and 335/30R18 rear: a 315 mm section width with a 30 aspect ratio on the 18-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Toyo Proxes R888R. We stock Falken FAL Azenis RT615K+ 315/30R18 at $420 each in this size, and other 315/30R18 tires through the 315/30R18 tire search.

Searching for 315/30R18 tires on a Nissan 350Z, or the right tire size for 18x13 -29 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Nissan 350Z is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

A slight rub at full lock, no spacers, overfenders or a widebody. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: poke. The wheels stick out past the fender. Flush fitment on a Nissan 350Z comes down to the offset and width above; copy them and you get the same result.

Will 18x13 -29 fit a Nissan 350Z?

Will Work Wheels VS-SS 18x13 -29 fit a 2004 Nissan 350Z? This owner's answer is yes.

6 other Nissan 350Z builds in the gallery run sizes like 19x10.5 / 19x11.5, 19x9.5 / 19x10, 19x13, 18x10, 19x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2004 Nissan 350Z: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan 350Z

Work Wheels VS-SS is not something we carry today. For the same look on your 350Z, browse wheels that fit the 2004 Nissan 350Z in 18-inch sizes near -29 offset; the Nissan 350Z wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2004 Nissan 350Z wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @Liconlegacy. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan 350Z and size before you order, and add your own ride once it is done so the next owner can see what fits.