2003 Nissan 350Z

2003 Nissan 350Z wheel fitment at a glance

This 2003 Nissan 350Z is running Work Wheels Meister, staggered: 19x13 +0 up front and 19x13 -22 in the rear, wrapped in 305/35R19 front and 305/30R19 rear Hankook Ventus S1 EVO3 K127 tires.

It sits on XYZ coilovers with a tucked stance, meaning the wheels sit inside the fender line.

If you are searching for Nissan 350Z wheel fitment, Work Wheels Meister on a Nissan 350Z, 19x13 +0 wheels on a 350Z, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Meister 19x13 +0 specs (staggered)

The wheels are 19-inch in diameter and 13 inches wide with a +0 offset up front, and 19-inch by 13 inches at -22 in the rear, in the 5x100 bolt pattern the Nissan 350Z uses.

A +0 offset on a 13-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear -22 offset on the 13-inch wheel pushes the rear out further for the staggered look.

Work Wheels Meister 19x13 +0 on a Nissan 350Z is a common 350Z question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

305/35R19 / 305/30R19 tires on 19x13 wheels

The tire size is 305/35R19 front and 305/30R19 rear: a 305 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Hankook Ventus S1 EVO3 K127. We stock Continental ExtremeContact Sport 02 305/35R19XL 106Y - 03151950000 at $453 each in this size, and other 305/35R19 tires through the 305/35R19 tire search.

Searching for 305/35R19 tires on a Nissan 350Z, or the right tire size for 19x13 +0 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on XYZ coilovers, which lets the owner dial in ride height and camber to clear 19x13 +0 and get the tucked look.

A slight rub at full lock, 30mm spacers, overfenders or a widebody. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: tucked. The wheels sit inside the fender line. Flush fitment on a Nissan 350Z comes down to the offset and width above; copy them and you get the same result.

Will 19x13 +0 fit a Nissan 350Z?

Will Work Wheels Meister 19x13 +0 fit a 2003 Nissan 350Z? This owner's answer is yes, on XYZ coilovers.

6 other Nissan 350Z builds in the gallery run sizes like 19x10.5 / 19x11.5, 19x9.5 / 19x10, 18x13 / 18x14, 18x10, 19x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2003 Nissan 350Z: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan 350Z

We sell this exact wheel: Work Meister S1 3P 5x100 19x13+0 L Disk Black is $1,180 each, about $4,720 for the set of four, made to order. Add tires on the product page and it ships as a mounted and balanced Nissan 350Z wheel and tire package with free shipping.

Financing is available on every set, and 2003 Nissan 350Z wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @Jan.j.pavlik.96. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan 350Z and size before you order, and add your own ride once it is done so the next owner can see what fits.