2008 Nissan 350Z

2008 Nissan 350Z wheel fitment at a glance

This 2008 Nissan 350Z is running Miro Type 398 in Gunmetal, staggered: 18x9.5 +20 up front and 18x10.5 +20 in the rear, wrapped in 225/45R18 BF Goodrich Advantage T/A Sport LT tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Nissan 350Z wheel fitment, Miro Type 398 on a Nissan 350Z, 18x9.5 +20 wheels on a 350Z, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Miro Type 398 18x9.5 +20 specs (staggered)

The wheels are 18-inch in diameter and 9.5 inches wide with a +20 offset up front, and 18-inch by 10.5 inches at +20 in the rear.

A +20 offset on a 9.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +20 offset on the 10.5-inch wheel keeps the rear in line with the front.

Miro Type 398 18x9.5 +20 on a Nissan 350Z is a common 350Z question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

225/45R18 tires on 18x9.5 wheels

The tire size is 225/45R18: a 225 mm section width with a 45 aspect ratio on the 18-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose BF Goodrich Advantage T/A Sport LT. We stock Ironman IRON iMOVE Gen 3 AS 225/45ZR18 at $99 each in this size, and other 225/45R18 tires through the 225/45R18 tire search.

Searching for 225/45R18 tires on a Nissan 350Z, or the right tire size for 18x9.5 +20 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 18x9.5 +20 and get the flush look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Nissan 350Z comes down to the offset and width above; copy them and you get the same result.

Will 18x9.5 +20 fit a Nissan 350Z?

Will Miro Type 398 18x9.5 +20 fit a 2008 Nissan 350Z? This owner's answer is yes, on coilovers, with no rubbing.

6 other Nissan 350Z builds in the gallery run sizes like 19x10.5 / 19x11.5, 19x9.5 / 19x10, 18x13 / 18x14, 19x13, 18x10, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2008 Nissan 350Z: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan 350Z

Miro Type 398 is not something we carry today. For the same look on your 350Z, browse wheels that fit the 2008 Nissan 350Z in 18-inch sizes near +20 offset; the Nissan 350Z wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2008 Nissan 350Z wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan 350Z and size before you order, and add your own ride once it is done so the next owner can see what fits.