1995 Mazda Miata

1995 Mazda Miata wheel fitment at a glance

This 1995 Mazda Miata is running Aero Racing 30 Series in 13x7 -25 at all four corners, wrapped in 155/80R13 Dunlop SP SPORT 01 tires.

It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda Miata wheel fitment, Aero Racing 30 Series on a Mazda Miata, 13x7 -25 wheels on a Miata, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Aero Racing 30 Series 13x7 -25 specs

The wheels are 13-inch in diameter and 7 inches wide with a -25 offset.

A -25 offset on a 7-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Aero Racing 30 Series 13x7 -25 on a Mazda Miata is a common Miata question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

155/80R13 tires on 13x7 wheels

The tire size is 155/80R13: a 155 mm section width with a 80 aspect ratio on the 13-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Dunlop SP SPORT 01. We stock Ironman iMOVE PT PLUS 155/80R13 79T - 98837 at $56 each in this size, and other 155/80R13 tires through the 155/80R13 tire search.

Searching for 155/80R13 tires on a Mazda Miata, or the right tire size for 13x7 -25 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Mazda Miata is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda Miata comes down to the offset and width above; copy them and you get the same result.

Will 13x7 -25 fit a Mazda Miata?

Will Aero Racing 30 Series 13x7 -25 fit a 1995 Mazda Miata? This owner's answer is yes, with no rubbing.

6 other Mazda Miata builds in the gallery run sizes like 16x9.5, 15x8, 16x7, 16x8, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1995 Mazda Miata: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda Miata

Aero Racing 30 Series is not something we carry today. For the same look on your Miata, browse wheels that fit the 1995 Mazda Miata in 13-inch sizes near -25 offset; the Mazda Miata wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1995 Mazda Miata wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda Miata and size before you order, and add your own ride once it is done so the next owner can see what fits.