2003 Mazda Miata

2003 Mazda Miata wheel fitment at a glance

This 2003 Mazda Miata is running Advan RGII in 16x7 +35 at all four corners, wrapped in 245/45R16 Bridgestone Potenza tires.

It sits on Tein coilovers with a tucked stance, meaning the wheels sit inside the fender line.

If you are searching for Mazda Miata wheel fitment, Advan RGII on a Mazda Miata, 16x7 +35 wheels on a Miata, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Advan RGII 16x7 +35 specs

The wheels are 16-inch in diameter and 7 inches wide with a +35 offset.

A +35 offset on a 7-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Advan RGII 16x7 +35 on a Mazda Miata is a common Miata question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/45R16 tires on 16x7 wheels

The tire size is 245/45R16: a 245 mm section width with a 45 aspect ratio on the 16-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Bridgestone Potenza. We stock Pirelli PZero Rosso Asimmetrico 245/45ZR16 94(Y) - 3569500 at $493 each in this size, and other 245/45R16 tires through the 245/45R16 tire search.

Searching for 245/45R16 tires on a Mazda Miata, or the right tire size for 16x7 +35 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on Tein coilovers, which lets the owner dial in ride height and camber to clear 16x7 +35 and get the tucked look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: tucked. The wheels sit inside the fender line. Flush fitment on a Mazda Miata comes down to the offset and width above; copy them and you get the same result.

Will 16x7 +35 fit a Mazda Miata?

Will Advan RGII 16x7 +35 fit a 2003 Mazda Miata? This owner's answer is yes, on Tein coilovers, with no rubbing.

6 other Mazda Miata builds in the gallery run sizes like 16x9.5, 15x8, 16x8, 16x9, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2003 Mazda Miata: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda Miata

Advan RGII is not something we carry today. For the same look on your Miata, browse wheels that fit the 2003 Mazda Miata in 16-inch sizes near +35 offset; the Mazda Miata wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2003 Mazda Miata wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda Miata and size before you order, and add your own ride once it is done so the next owner can see what fits.