1999 Mazda Miata

1999 Mazda Miata wheel fitment at a glance

This 1999 Mazda Miata is running SSR Wheels Type C in 15x6.5 +35 at all four corners, wrapped in 205/50R15 Hankook Ventus V12 EVO2 K120 tires.

It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda Miata wheel fitment, SSR Wheels Type C on a Mazda Miata, 15x6.5 +35 wheels on a Miata, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

SSR Wheels Type C 15x6.5 +35 specs

The wheels are 15-inch in diameter and 6.5 inches wide with a +35 offset.

A +35 offset on a 6.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

SSR Wheels Type C 15x6.5 +35 on a Mazda Miata is a common Miata question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

205/50R15 tires on 15x6.5 wheels

The tire size is 205/50R15: a 205 mm section width with a 50 aspect ratio on the 15-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Hankook Ventus V12 EVO2 K120. We stock Yokohama YOK Advan Fleva 205/50R15 at $153 each in this size, and other 205/50R15 tires through the 205/50R15 tire search.

Searching for 205/50R15 tires on a Mazda Miata, or the right tire size for 15x6.5 +35 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Mazda Miata is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda Miata comes down to the offset and width above; copy them and you get the same result.

Will 15x6.5 +35 fit a Mazda Miata?

Will SSR Wheels Type C 15x6.5 +35 fit a 1999 Mazda Miata? This owner's answer is yes, with no rubbing.

6 other Mazda Miata builds in the gallery run sizes like 16x9.5, 15x8, 16x7, 16x8, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1999 Mazda Miata: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda Miata

SSR Wheels Type C is not something we carry today. For the same look on your Miata, browse wheels that fit the 1999 Mazda Miata in 15-inch sizes near +35 offset; the Mazda Miata wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1999 Mazda Miata wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda Miata and size before you order, and add your own ride once it is done so the next owner can see what fits.