2015 Scion FR-S

2015 Scion FR-S wheel fitment at a glance

This 2015 Scion FR-S is running Work Wheels Meister in 18x9.5 +24 at all four corners, wrapped in 215/40R18 Falken Azenis FK460 A/S tires.

It sits on Air Lift Performance air suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Scion FR-S wheel fitment, Work Wheels Meister on a Scion FR-S, 18x9.5 +24 wheels on a FR-S, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Meister 18x9.5 +24 specs

The wheels are 18-inch in diameter and 9.5 inches wide with a +24 offset, in the 5x100 bolt pattern the Scion FR-S uses.

A +24 offset on a 9.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Work Wheels Meister 18x9.5 +24 on a Scion FR-S is a common FR-S question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

215/40R18 tires on 18x9.5 wheels

The tire size is 215/40R18: a 215 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Falken Azenis FK460 A/S. We stock Lexani LXUHP-207 215/40R18 at $82 each in this size, and other 215/40R18 tires through the 215/40R18 tire search.

Searching for 215/40R18 tires on a Scion FR-S, or the right tire size for 18x9.5 +24 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

It rides on Air Lift Performance air suspension, so it can lay low parked and raise up to drive.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Scion FR-S comes down to the offset and width above; copy them and you get the same result.

Will 18x9.5 +24 fit a Scion FR-S?

Will Work Wheels Meister 18x9.5 +24 fit a 2015 Scion FR-S? This owner's answer is yes, on Air Lift Performance air suspension, with no rubbing.

6 other Scion FR-S builds in the gallery run sizes like 18x9.5, 19x10.5 / 19x11.5, 20x8, 18x10.5 / 18x11.5, so you can compare offsets, tire sizes and suspension before you order. See all Scion builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2015 Scion FR-S: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Scion FR-S

We sell this exact wheel: Work Meister S1 3P 5x100 18x9.5+24 O Disk Black is $1,000 each, about $4,000 for the set of four, made to order. Add tires on the product page and it ships as a mounted and balanced Scion FR-S wheel and tire package with free shipping.

Financing is available on every set, and 2015 Scion FR-S wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @less.izz.moree. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Scion FR-S and size before you order, and add your own ride once it is done so the next owner can see what fits.