2015 Scion FR-S

2015 Scion FR-S wheel fitment at a glance

This 2015 Scion FR-S is running Work Wheels Meister, staggered: 18x9.5 +38 up front and 18x9.5 +35 in the rear, wrapped in 215/35R18 front and 225/40R18 rear Nankangs Ns 2 tires.

It sits on Prazis air suspension with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Scion FR-S wheel fitment, Work Wheels Meister on a Scion FR-S, 18x9.5 +38 wheels on a FR-S, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Meister 18x9.5 +38 specs (staggered)

The wheels are 18-inch in diameter and 9.5 inches wide with a +38 offset up front, and 18-inch by 9.5 inches at +35 in the rear, in the 5x100 bolt pattern the Scion FR-S uses.

A +38 offset on a 9.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +35 offset on the 9.5-inch wheel pushes the rear out further for the staggered look.

Work Wheels Meister 18x9.5 +38 on a Scion FR-S is a common FR-S question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

215/35R18 / 225/40R18 tires on 18x9.5 wheels

The tire size is 215/35R18 front and 225/40R18 rear: a 215 mm section width with a 35 aspect ratio on the 18-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Nankangs Ns 2. We stock Versatyre CRX4000 215/35R18 84W - CRX40001806 at $68 each in this size, and other 215/35R18 tires through the 215/35R18 tire search.

Searching for 215/35R18 tires on a Scion FR-S, or the right tire size for 18x9.5 +38 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

It rides on Prazis air suspension, so it can lay low parked and raise up to drive.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Scion FR-S comes down to the offset and width above; copy them and you get the same result.

Will 18x9.5 +38 fit a Scion FR-S?

Will Work Wheels Meister 18x9.5 +38 fit a 2015 Scion FR-S? This owner's answer is yes, on Prazis air suspension, with no rubbing.

6 other Scion FR-S builds in the gallery run sizes like 19x10.5 / 19x11.5, 18x9.5, 20x8, 18x10.5 / 18x11.5, so you can compare offsets, tire sizes and suspension before you order. See all Scion builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2015 Scion FR-S: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Scion FR-S

We sell this exact wheel: Work Meister S1 3P 5x100 18x9.5+37 O Disk Black is $1,000 each, about $4,000 for the set of four, made to order. Add tires on the product page and it ships as a mounted and balanced Scion FR-S wheel and tire package with free shipping.

Financing is available on every set, and 2015 Scion FR-S wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @bagged_pandafrs. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Scion FR-S and size before you order, and add your own ride once it is done so the next owner can see what fits.