2014 Audi allroad

2014 Audi allroad wheel fitment at a glance

This 2014 Audi allroad is running Rotiform CCV, staggered: 20x10 +30 up front and 20x9 +25 in the rear, wrapped in 255/35R20 tires.

It sits on H&R lowering springs with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Audi allroad wheel fitment, Rotiform CCV on a Audi allroad, 20x10 +30 wheels on a allroad, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Rotiform CCV 20x10 +30 specs (staggered)

The wheels are 20-inch in diameter and 10 inches wide with a +30 offset up front, and 20-inch by 9 inches at +25 in the rear.

A +30 offset on a 10-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +25 offset on the 9-inch wheel pushes the rear out further for the staggered look.

Rotiform CCV 20x10 +30 on a Audi allroad is a common allroad question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/35R20 tires on 20x10 wheels

The tire size is 255/35R20: a 255 mm section width with a 35 aspect ratio on the 20-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

We stock Lexani LX-TWENTY 255/35R20 at $117 each in 255/35R20, and more 255/35R20 tires through the tire search.

Searching for 255/35R20 tires on a Audi allroad, or the right tire size for 20x10 +30 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from H&R lowering springs, the simplest way to close the fender gap on a Audi allroad while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Audi allroad comes down to the offset and width above; copy them and you get the same result.

Will 20x10 +30 fit a Audi allroad?

Will Rotiform CCV 20x10 +30 fit a 2014 Audi allroad? This owner's answer is yes, on H&R lowering springs, with no rubbing.

6 other Audi allroad builds in the gallery run sizes like 20x9.5, 19x9, 20x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Audi builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2014 Audi allroad: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Audi allroad

We carry Rotiform CCV, though not yet in 20x10 +30: see the Rotiform CCV sizes we stock, or every wheel that fits the 2014 Audi allroad in sizes close to this one.

Financing is available on every set, and 2014 Audi allroad wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Audi allroad and size before you order, and add your own ride once it is done so the next owner can see what fits.