2014 Audi allroad

2014 Audi allroad wheel fitment at a glance

This 2014 Audi allroad is running Audi S-Line Rotor in 19x9 +33 at all four corners, wrapped in 255/35R19 tires.

It sits on H&R springs lowering springs with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Audi allroad wheel fitment, Audi S-Line Rotor on a Audi allroad, 19x9 +33 wheels on a allroad, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Audi S-Line Rotor 19x9 +33 specs

The wheels are 19-inch in diameter and 9 inches wide with a +33 offset.

A +33 offset on a 9-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Audi S-Line Rotor 19x9 +33 on a Audi allroad is a common allroad question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/35R19 tires on 19x9 wheels

The tire size is 255/35R19: a 255 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Ironman IRON iMOVE Gen 3 AS 255/35ZR19XL at $124 each in 255/35R19, and more 255/35R19 tires through the tire search.

Searching for 255/35R19 tires on a Audi allroad, or the right tire size for 19x9 +33 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from H&R springs lowering springs, the simplest way to close the fender gap on a Audi allroad while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Audi allroad comes down to the offset and width above; copy them and you get the same result.

Will 19x9 +33 fit a Audi allroad?

Will Audi S-Line Rotor 19x9 +33 fit a 2014 Audi allroad? This owner's answer is yes, on H&R springs lowering springs, with no rubbing.

6 other Audi allroad builds in the gallery run sizes like 20x9.5, 20x10 / 20x9, 20x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Audi builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2014 Audi allroad: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Audi allroad

Audi S-Line Rotor is not something we carry today. For the same look on your allroad, browse wheels that fit the 2014 Audi allroad in 19-inch sizes near +33 offset; the Audi allroad wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2014 Audi allroad wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Audi allroad and size before you order, and add your own ride once it is done so the next owner can see what fits.