1989 Nissan 240SX

1989 Nissan 240SX wheel fitment at a glance

This 1989 Nissan 240SX is running DAD Garson Ryugi deep Racing in 18x11.5 +0 at all four corners, wrapped in 265/40R18 front and 265/35R18 rear Kenda KAISER KR20A-DRIFT tires.

It sits on coilovers with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Nissan 240SX wheel fitment, DAD Garson Ryugi deep Racing on a Nissan 240SX, 18x11.5 +0 wheels on a 240SX, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

DAD Garson Ryugi deep Racing 18x11.5 +0 specs

The wheels are 18-inch in diameter and 11.5 inches wide with a +0 offset.

A +0 offset on a 11.5-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

DAD Garson Ryugi deep Racing 18x11.5 +0 on a Nissan 240SX is a common 240SX question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

265/40R18 / 265/35R18 tires on 18x11.5 wheels

The tire size is 265/40R18 front and 265/35R18 rear: a 265 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Kenda KAISER KR20A-DRIFT. We stock Continental CON ExtremeContact DWS06 Plus 265/40ZR18XL at $251 each in this size, and other 265/40R18 tires through the 265/40R18 tire search.

Searching for 265/40R18 tires on a Nissan 240SX, or the right tire size for 18x11.5 +0 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 18x11.5 +0 and get the nearly flush look.

No rubbing at all, front or rear, no spacers, overfenders or a widebody. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Nissan 240SX comes down to the offset and width above; copy them and you get the same result.

Will 18x11.5 +0 fit a Nissan 240SX?

Will DAD Garson Ryugi deep Racing 18x11.5 +0 fit a 1989 Nissan 240SX? This owner's answer is yes, on coilovers, with no rubbing.

6 other Nissan 240SX builds in the gallery run sizes like 17x11, 17x10.5 / 17x11, 17x10.5, 16x7.5, 18x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1989 Nissan 240SX: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan 240SX

DAD Garson Ryugi deep Racing is not something we carry today. For the same look on your 240SX, browse wheels that fit the 1989 Nissan 240SX in 18-inch sizes near +0 offset; the Nissan 240SX wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1989 Nissan 240SX wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @nuorijapani. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan 240SX and size before you order, and add your own ride once it is done so the next owner can see what fits.