1993 Nissan 240SX

1993 Nissan 240SX wheel fitment at a glance

This 1993 Nissan 240SX is running Work Wheels Equip, staggered: 17x10.5 +10 up front and 17x11 -16 in the rear, wrapped in 255/35R17 front and 275/40R17 rear Accelera 651 tires.

It sits on Feal Suspension coilovers with a poke stance, meaning the wheels stick out past the fender.

If you are searching for Nissan 240SX wheel fitment, Work Wheels Equip on a Nissan 240SX, 17x10.5 +10 wheels on a 240SX, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Equip 17x10.5 +10 specs (staggered)

The wheels are 17-inch in diameter and 10.5 inches wide with a +10 offset up front, and 17-inch by 11 inches at -16 in the rear.

A +10 offset on a 10.5-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear -16 offset on the 11-inch wheel pushes the rear out further for the staggered look.

Work Wheels Equip 17x10.5 +10 on a Nissan 240SX is a common 240SX question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/35R17 / 275/40R17 tires on 17x10.5 wheels

The tire size is 255/35R17 front and 275/40R17 rear: a 255 mm section width with a 35 aspect ratio on the 17-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Accelera 651. See every 255/35R17 tire we carry for this size.

Searching for 255/35R17 tires on a Nissan 240SX, or the right tire size for 17x10.5 +10 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on Feal Suspension coilovers, which lets the owner dial in ride height and camber to clear 17x10.5 +10 and get the poke look.

No rubbing at all, front or rear, no spacers, overfenders or a widebody. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: poke. The wheels stick out past the fender. Flush fitment on a Nissan 240SX comes down to the offset and width above; copy them and you get the same result.

Will 17x10.5 +10 fit a Nissan 240SX?

Will Work Wheels Equip 17x10.5 +10 fit a 1993 Nissan 240SX? This owner's answer is yes, on Feal Suspension coilovers, with no rubbing.

6 other Nissan 240SX builds in the gallery run sizes like 17x11, 17x10.5, 16x7.5, 18x10.5, 17x9.5 / 17x10, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1993 Nissan 240SX: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan 240SX

We carry Work Wheels Equip, though not yet in 17x10.5 +10: see the Work Wheels Equip sizes we stock, or every wheel that fits the 1993 Nissan 240SX in sizes close to this one.

Financing is available on every set, and 1993 Nissan 240SX wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @atalladega. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan 240SX and size before you order, and add your own ride once it is done so the next owner can see what fits.