2009 Toyota FJ Cruiser

2009 Toyota FJ Cruiser wheel fitment at a glance

This 2009 Toyota FJ Cruiser is running Pro Comp Series 29 in 16x8 +0 at all four corners, wrapped in 305/70R16 tires.

It sits on Toytec Ultimate 3" lift with heavy duty springs lowering springs with a poke stance, meaning the wheels stick out past the fender.

If you are searching for Toyota FJ Cruiser wheel fitment, Pro Comp Series 29 on a Toyota FJ Cruiser, 16x8 +0 wheels on a FJ Cruiser, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Pro Comp Series 29 16x8 +0 specs

The wheels are 16-inch in diameter and 8 inches wide with a +0 offset.

A +0 offset on a 8-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Pro Comp Series 29 16x8 +0 on a Toyota FJ Cruiser is a common FJ Cruiser question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

305/70R16 tires on 16x8 wheels

The tire size is 305/70R16: a 305 mm section width with a 70 aspect ratio on the 16-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Venom Power Swamp Thing A/T 305/70R16 at $240 each in 305/70R16, and more 305/70R16 tires through the tire search.

Searching for 305/70R16 tires on a Toyota FJ Cruiser, or the right tire size for 16x8 +0 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from Toytec Ultimate 3" lift with heavy duty springs lowering springs, the simplest way to close the fender gap on a Toyota FJ Cruiser while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: poke. The wheels stick out past the fender. Flush fitment on a Toyota FJ Cruiser comes down to the offset and width above; copy them and you get the same result.

Will 16x8 +0 fit a Toyota FJ Cruiser?

Will Pro Comp Series 29 16x8 +0 fit a 2009 Toyota FJ Cruiser? This owner's answer is yes, on Toytec Ultimate 3" lift with heavy duty springs lowering springs, with no rubbing.

6 other Toyota FJ Cruiser builds in the gallery run sizes like 20x12.5, 17x9, 16x8, 17x8.5, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2009 Toyota FJ Cruiser: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Toyota FJ Cruiser

Pro Comp Series 29 is not something we carry today. For the same look on your FJ Cruiser, browse wheels that fit the 2009 Toyota FJ Cruiser in 16-inch sizes near +0 offset; the Toyota FJ Cruiser wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2009 Toyota FJ Cruiser wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota FJ Cruiser and size before you order, and add your own ride once it is done so the next owner can see what fits.