2013 Toyota FJ Cruiser

2013 Toyota FJ Cruiser wheel fitment at a glance

This 2013 Toyota FJ Cruiser is running KMD XD801 in 17x9 +0 at all four corners, wrapped in 315/70R17 tires.

It sits on front 4" (modified RCX 6"), rear 3" (Toyota airsprings w/spacers), Bilstein 5100 shocks all around air suspension with a poke stance, meaning the wheels stick out past the fender.

If you are searching for Toyota FJ Cruiser wheel fitment, KMD XD801 on a Toyota FJ Cruiser, 17x9 +0 wheels on a FJ Cruiser, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

KMD XD801 17x9 +0 specs

The wheels are 17-inch in diameter and 9 inches wide with a +0 offset.

A +0 offset on a 9-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

KMD XD801 17x9 +0 on a Toyota FJ Cruiser is a common FJ Cruiser question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

315/70R17 tires on 17x9 wheels

The tire size is 315/70R17: a 315 mm section width with a 70 aspect ratio on the 17-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock AMP Terrain Attack A/T A LT315/70R17 at $287 each in 315/70R17, and more 315/70R17 tires through the tire search.

Searching for 315/70R17 tires on a Toyota FJ Cruiser, or the right tire size for 17x9 +0 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

It rides on front 4" (modified RCX 6"), rear 3" (Toyota airsprings w/spacers), Bilstein 5100 shocks all around air suspension, so it can lay low parked and raise up to drive.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: poke. The wheels stick out past the fender. Flush fitment on a Toyota FJ Cruiser comes down to the offset and width above; copy them and you get the same result.

Will 17x9 +0 fit a Toyota FJ Cruiser?

Will KMD XD801 17x9 +0 fit a 2013 Toyota FJ Cruiser? This owner's answer is yes, on front 4" (modified RCX 6"), rear 3" (Toyota airsprings w/spacers), Bilstein 5100 shocks all around air suspension, with no rubbing.

6 other Toyota FJ Cruiser builds in the gallery run sizes like 20x12.5, 17x9, 16x8, 17x8.5, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2013 Toyota FJ Cruiser: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Toyota FJ Cruiser

KMD XD801 is not something we carry today. For the same look on your FJ Cruiser, browse wheels that fit the 2013 Toyota FJ Cruiser in 17-inch sizes near +0 offset; the Toyota FJ Cruiser wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2013 Toyota FJ Cruiser wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota FJ Cruiser and size before you order, and add your own ride once it is done so the next owner can see what fits.