2015 Mazda CX-5

2015 Mazda CX-5 wheel fitment at a glance

This 2015 Mazda CX-5 is running Forgestar CF5V in 20x9 +45 at all four corners, wrapped in 245/45R20 tires.

It sits on lowering springs with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Mazda CX-5 wheel fitment, Forgestar CF5V on a Mazda CX-5, 20x9 +45 wheels on a CX-5, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Forgestar CF5V 20x9 +45 specs

The wheels are 20-inch in diameter and 9 inches wide with a +45 offset, in the 5x120 bolt pattern the Mazda CX-5 uses.

A +45 offset on a 9-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in.

Forgestar CF5V 20x9 +45 on a Mazda CX-5 is a common CX-5 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/45R20 tires on 20x9 wheels

The tire size is 245/45R20: a 245 mm section width with a 45 aspect ratio on the 20-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

We stock Lexani LX-TWENTY 245/45R20 at $123 each in 245/45R20, and more 245/45R20 tires through the tire search.

Searching for 245/45R20 tires on a Mazda CX-5, or the right tire size for 20x9 +45 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from lowering springs, the simplest way to close the fender gap on a Mazda CX-5 while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Mazda CX-5 comes down to the offset and width above; copy them and you get the same result.

Will 20x9 +45 fit a Mazda CX-5?

Will Forgestar CF5V 20x9 +45 fit a 2015 Mazda CX-5? This owner's answer is yes, on lowering springs, with no rubbing.

2 other Mazda CX-5 builds in the gallery run sizes like 19x8, 20x9.5 / 20x10.5, 19x9 / 20x12, 19x9.5 / 19x11, 19x9, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2015 Mazda CX-5: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda CX-5

We sell this wheel in the closest size we carry: Forgestar CF5V 5x120 20x9 +38 Satin Black is $535 each, about $2,140 for the set of four, in stock and ready to ship. Add tires on the product page and it ships as a mounted and balanced Mazda CX-5 wheel and tire package with free shipping.

Financing is available on every set, and 2015 Mazda CX-5 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda CX-5 and size before you order, and add your own ride once it is done so the next owner can see what fits.