Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
BBS R3 19x8 +50 225/55R19 Stock suspension Tucked stance
2013 Mazda CX-5
This 2013 Mazda CX-5 is running BBS R3 in 19x8 +50 at all four corners, wrapped in 225/55R19 tires.
It sits on stock suspension with a tucked stance, meaning the wheels sit inside the fender line.
If you are searching for Mazda CX-5 wheel fitment, BBS R3 on a Mazda CX-5, 19x8 +50 wheels on a CX-5, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.
The wheels are 19-inch in diameter and 8 inches wide with a +50 offset.
A +50 offset on a 8-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in.
BBS R3 19x8 +50 on a Mazda CX-5 is a common CX-5 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.
The tire size is 225/55R19: a 225 mm section width with a 55 aspect ratio on the 19-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).
We stock Lexani LX-TWENTY 225/55R19 at $133 each in 225/55R19, and more 225/55R19 tires through the tire search.
Searching for 225/55R19 tires on a Mazda CX-5, or the right tire size for 19x8 +50 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.
This Mazda CX-5 is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.
No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.
Stance: tucked. The wheels sit inside the fender line. Flush fitment on a Mazda CX-5 comes down to the offset and width above; copy them and you get the same result.
Will BBS R3 19x8 +50 fit a 2013 Mazda CX-5? This owner's answer is yes, with no rubbing.
1 other Mazda CX-5 build in the gallery runs sizes like 20x9, 19x8 / 19x9.5, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.
Our fitment guarantee covers wheels bought through wheels that fit the 2013 Mazda CX-5: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.
BBS R3 is not something we carry today. For the same look on your CX-5, browse wheels that fit the 2013 Mazda CX-5 in 19-inch sizes near +50 offset; the Mazda CX-5 wheel and tire packages there ship mounted and balanced.
Financing is available on every set, and 2013 Mazda CX-5 wheels ship free when bought as a wheel and tire package.
Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda CX-5 and size before you order, and add your own ride once it is done so the next owner can see what fits.
