2019 Toyota Sequoia

2019 Toyota Sequoia wheel fitment at a glance

This 2019 Toyota Sequoia is running Icon Vector 5 in 17x8.5 +25 at all four corners, wrapped in 285/75R17 tires.

It sits on Dobinsons 2.5" lift kit with variable rear coils coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Toyota Sequoia wheel fitment, Icon Vector 5 on a Toyota Sequoia, 17x8.5 +25 wheels on a Sequoia, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Icon Vector 5 17x8.5 +25 specs

The wheels are 17-inch in diameter and 8.5 inches wide with a +25 offset.

A +25 offset on a 8.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Icon Vector 5 17x8.5 +25 on a Toyota Sequoia is a common Sequoia question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

285/75R17 tires on 17x8.5 wheels

The tire size is 285/75R17: a 285 mm section width with a 75 aspect ratio on the 17-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Nexen NEX Roadian ATX 285/75R17 at $306 each in 285/75R17, and more 285/75R17 tires through the tire search.

Searching for 285/75R17 tires on a Toyota Sequoia, or the right tire size for 17x8.5 +25 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on Dobinsons 2.5" lift kit with variable rear coils coilovers, which lets the owner dial in ride height and camber to clear 17x8.5 +25 and get the flush look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Toyota Sequoia comes down to the offset and width above; copy them and you get the same result.

Will 17x8.5 +25 fit a Toyota Sequoia?

Will Icon Vector 5 17x8.5 +25 fit a 2019 Toyota Sequoia? This owner's answer is yes, on Dobinsons 2.5" lift kit with variable rear coils coilovers, with no rubbing.

4 other Toyota Sequoia builds in the gallery run sizes like 18x8, 17x8.5, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2019 Toyota Sequoia: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Toyota Sequoia

Icon Vector 5 is not something we carry today. For the same look on your Sequoia, browse wheels that fit the 2019 Toyota Sequoia in 17-inch sizes near +25 offset; the Toyota Sequoia wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2019 Toyota Sequoia wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota Sequoia and size before you order, and add your own ride once it is done so the next owner can see what fits.