2019 Toyota Tundra

2019 Toyota Tundra wheel fitment at a glance

This 2019 Toyota Tundra is running Icon-Alloys Rebound in Titanium in 17x8.5 +25 at all four corners, wrapped in 325/65R17 Cooper Tires Discoverer AT3 XLT tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Toyota Tundra wheel fitment, Icon-Alloys Rebound on a Toyota Tundra, 17x8.5 +25 wheels on a Tundra, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Icon-Alloys Rebound 17x8.5 +25 specs

The wheels are 17-inch in diameter and 8.5 inches wide with a +25 offset.

A +25 offset on a 8.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Icon-Alloys Rebound 17x8.5 +25 on a Toyota Tundra is a common Tundra question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

325/65R17 tires on 17x8.5 wheels

The tire size is 325/65R17: a 325 mm section width with a 65 aspect ratio on the 17-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Cooper Tires Discoverer AT3 XLT. See every 325/65R17 tire we carry for this size.

Searching for 325/65R17 tires on a Toyota Tundra, or the right tire size for 17x8.5 +25 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 17x8.5 +25 and get the flush look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Toyota Tundra comes down to the offset and width above; copy them and you get the same result.

Will 17x8.5 +25 fit a Toyota Tundra?

Will Icon-Alloys Rebound 17x8.5 +25 fit a 2019 Toyota Tundra? This owner's answer is yes, on coilovers, with no rubbing.

6 other Toyota Tundra builds in the gallery run sizes like 24x12, 20x10, 17x9, 18x9, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2019 Toyota Tundra: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Toyota Tundra

Icon-Alloys Rebound is not something we carry today. For the same look on your Tundra, browse wheels that fit the 2019 Toyota Tundra in 17-inch sizes near +25 offset; the Toyota Tundra wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2019 Toyota Tundra wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota Tundra and size before you order, and add your own ride once it is done so the next owner can see what fits.