2024 Audi A6 Quattro

2024 Audi A6 Quattro wheel fitment at a glance

This 2024 Audi A6 Quattro is running Forgeline GTD1 in 22x11 +17 at all four corners, wrapped in 305/30R22 tires.

It sits on lowered -32mm lowering springs with a hellaflush stance, meaning the wheel face sits at or just past the fender, the most aggressive look.

If you are searching for Audi A6 Quattro wheel fitment, Forgeline GTD1 on a Audi A6 Quattro, 22x11 +17 wheels on a A6 Quattro, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Forgeline GTD1 22x11 +17 specs

The wheels are 22-inch in diameter and 11 inches wide with a +17 offset.

A +17 offset on a 11-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Forgeline GTD1 22x11 +17 on a Audi A6 Quattro is a common A6 Quattro question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

305/30R22 tires on 22x11 wheels

The tire size is 305/30R22: a 305 mm section width with a 30 aspect ratio on the 22-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Lexani LX-TWENTY 305/30R22 at $207 each in 305/30R22, and more 305/30R22 tires through the tire search.

Searching for 305/30R22 tires on a Audi A6 Quattro, or the right tire size for 22x11 +17 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from lowered -32mm lowering springs, the simplest way to close the fender gap on a Audi A6 Quattro while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: hellaflush. The wheel face sits at or just past the fender, the most aggressive look. Flush fitment on a Audi A6 Quattro comes down to the offset and width above; copy them and you get the same result.

Will 22x11 +17 fit a Audi A6 Quattro?

Will Forgeline GTD1 22x11 +17 fit a 2024 Audi A6 Quattro? This owner's answer is yes, on lowered -32mm lowering springs, with no rubbing.

6 other Audi A6 Quattro builds in the gallery run sizes like 20x9.5, 21x9.5, 20x10, 20x9, 22x11, so you can compare offsets, tire sizes and suspension before you order. See all Audi builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2024 Audi A6 Quattro: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Audi A6 Quattro

Forgeline GTD1 is not something we carry today. For the same look on your A6 Quattro, browse wheels that fit the 2024 Audi A6 Quattro in 22-inch sizes near +17 offset; the Audi A6 Quattro wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2024 Audi A6 Quattro wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Audi A6 Quattro and size before you order, and add your own ride once it is done so the next owner can see what fits.