2019 Audi A6 Quattro

2019 Audi A6 Quattro wheel fitment at a glance

This 2019 Audi A6 Quattro is running HRE P44SC in 21x9.5 +40 at all four corners, wrapped in 265/30R21 tires.

It sits on H&R ETS lowering springs with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Audi A6 Quattro wheel fitment, HRE P44SC on a Audi A6 Quattro, 21x9.5 +40 wheels on a A6 Quattro, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

HRE P44SC 21x9.5 +40 specs

The wheels are 21-inch in diameter and 9.5 inches wide with a +40 offset.

A +40 offset on a 9.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

HRE P44SC 21x9.5 +40 on a Audi A6 Quattro is a common A6 Quattro question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

265/30R21 tires on 21x9.5 wheels

The tire size is 265/30R21: a 265 mm section width with a 30 aspect ratio on the 21-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

We stock Pirelli PIR P-Zero (PZ4) 265/30R21XL at $579 each in 265/30R21, and more 265/30R21 tires through the tire search.

Searching for 265/30R21 tires on a Audi A6 Quattro, or the right tire size for 21x9.5 +40 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from H&R ETS lowering springs, the simplest way to close the fender gap on a Audi A6 Quattro while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Audi A6 Quattro comes down to the offset and width above; copy them and you get the same result.

Will 21x9.5 +40 fit a Audi A6 Quattro?

Will HRE P44SC 21x9.5 +40 fit a 2019 Audi A6 Quattro? This owner's answer is yes, on H&R ETS lowering springs, with no rubbing.

6 other Audi A6 Quattro builds in the gallery run sizes like 20x9.5, 20x10, 20x9, 22x11, 21x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Audi builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2019 Audi A6 Quattro: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Audi A6 Quattro

HRE P44SC is not something we carry today. For the same look on your A6 Quattro, browse wheels that fit the 2019 Audi A6 Quattro in 21-inch sizes near +40 offset; the Audi A6 Quattro wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2019 Audi A6 Quattro wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Audi A6 Quattro and size before you order, and add your own ride once it is done so the next owner can see what fits.