Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
Sparco Asetto Gara 17x7 +45 205/45R17 Lowering springs Nearly flush stance
2013 Honda CR-Z
This 2013 Honda CR-Z is running Sparco Asetto Gara in 17x7 +45 at all four corners, wrapped in 205/45R17 tires.
It sits on lowering springs with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.
If you are searching for Honda CR-Z wheel fitment, Sparco Asetto Gara on a Honda CR-Z, 17x7 +45 wheels on a CR-Z, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.
The wheels are 17-inch in diameter and 7 inches wide with a +45 offset.
A +45 offset on a 7-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in.
Sparco Asetto Gara 17x7 +45 on a Honda CR-Z is a common CR-Z question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.
The tire size is 205/45R17: a 205 mm section width with a 45 aspect ratio on the 17-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).
We stock Lexani LXUHP-207 205/45R17 at $79 each in 205/45R17, and more 205/45R17 tires through the tire search.
Searching for 205/45R17 tires on a Honda CR-Z, or the right tire size for 17x7 +45 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.
The drop comes from lowering springs, the simplest way to close the fender gap on a Honda CR-Z while keeping the factory shocks.
No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.
Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Honda CR-Z comes down to the offset and width above; copy them and you get the same result.
Will Sparco Asetto Gara 17x7 +45 fit a 2013 Honda CR-Z? This owner's answer is yes, on lowering springs, with no rubbing.
3 other Honda CR-Z builds in the gallery run sizes like 17x8.5 / 17x9.5, 17x8, 18x8, 17x7, so you can compare offsets, tire sizes and suspension before you order. See all Honda builds.
Our fitment guarantee covers wheels bought through wheels that fit the 2013 Honda CR-Z: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.
Sparco Asetto Gara is not something we carry today. For the same look on your CR-Z, browse wheels that fit the 2013 Honda CR-Z in 17-inch sizes near +45 offset; the Honda CR-Z wheel and tire packages there ship mounted and balanced.
Financing is available on every set, and 2013 Honda CR-Z wheels ship free when bought as a wheel and tire package.
Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Honda CR-Z and size before you order, and add your own ride once it is done so the next owner can see what fits.
