Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
Work vs-xx 17x8.5 +41 / 17x9.5 +41 215/45R17 Stock suspension Nearly flush stance
This 2013 Honda CR-Z is running Work vs-xx, staggered: 17x8.5 +41 up front and 17x9.5 +41 in the rear, wrapped in 215/45R17 tires.
It sits on stock suspension with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.
If you are searching for Honda CR-Z wheel fitment, Work vs-xx on a Honda CR-Z, 17x8.5 +41 wheels on a CR-Z, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.
The wheels are 17-inch in diameter and 8.5 inches wide with a +41 offset up front, and 17-inch by 9.5 inches at +41 in the rear.
A +41 offset on a 8.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +41 offset on the 9.5-inch wheel keeps the rear in line with the front.
Work vs-xx 17x8.5 +41 on a Honda CR-Z is a common CR-Z question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.
The tire size is 215/45R17: a 215 mm section width with a 45 aspect ratio on the 17-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).
We stock Ironman IRON iMOVE Gen 3 AS 215/45ZR17XL at $82 each in 215/45R17, and more 215/45R17 tires through the tire search.
Searching for 215/45R17 tires on a Honda CR-Z, or the right tire size for 17x8.5 +41 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.
This Honda CR-Z is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.
No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.
Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Honda CR-Z comes down to the offset and width above; copy them and you get the same result.
Will Work vs-xx 17x8.5 +41 fit a 2013 Honda CR-Z? This owner's answer is yes, with no rubbing.
3 other Honda CR-Z builds in the gallery run sizes like 17x8, 17x7, 18x8, 19x9 / 19x10, so you can compare offsets, tire sizes and suspension before you order. See all Honda builds.
Our fitment guarantee covers wheels bought through wheels that fit the 2013 Honda CR-Z: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.
Work vs-xx is not something we carry today. For the same look on your CR-Z, browse wheels that fit the 2013 Honda CR-Z in 17-inch sizes near +41 offset; the Honda CR-Z wheel and tire packages there ship mounted and balanced.
Financing is available on every set, and 2013 Honda CR-Z wheels ship free when bought as a wheel and tire package.
Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Honda CR-Z and size before you order, and add your own ride once it is done so the next owner can see what fits.
