1993 Mazda RX-7

1993 Mazda RX-7 wheel fitment at a glance

This 1993 Mazda RX-7 is running Work Wheels Meister S1R in 18x9 +35 at all four corners, wrapped in 255/35R18 Hankook Ventus RS3 Z222 tires.

It sits on lowering springs with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-7 wheel fitment, Work Wheels Meister S1R on a Mazda RX-7, 18x9 +35 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Meister S1R 18x9 +35 specs

The wheels are 18-inch in diameter and 9 inches wide with a +35 offset, in the 4x100 bolt pattern the Mazda RX-7 uses.

A +35 offset on a 9-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Work Wheels Meister S1R 18x9 +35 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/35R18 tires on 18x9 wheels

The tire size is 255/35R18: a 255 mm section width with a 35 aspect ratio on the 18-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Hankook Ventus RS3 Z222. We stock Atlas Force UHP 255/35R18 94Y - 221017366 at $99 each in this size, and other 255/35R18 tires through the 255/35R18 tire search.

Searching for 255/35R18 tires on a Mazda RX-7, or the right tire size for 18x9 +35 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from lowering springs, the simplest way to close the fender gap on a Mazda RX-7 while keeping the factory shocks.

No rubbing at all, front or rear, 25mm spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 18x9 +35 fit a Mazda RX-7?

Will Work Wheels Meister S1R 18x9 +35 fit a 1993 Mazda RX-7? This owner's answer is yes, on lowering springs, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 17x7.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1993 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

We sell this wheel in the closest size we carry: Work Meister S1R 4x100 18x9+38 A Disk Ashdot Titanium is $711 each, about $2,844 for the set of four. Add tires on the product page and it ships as a mounted and balanced Mazda RX-7 wheel and tire package with free shipping.

Financing is available on every set, and 1993 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.