1991 Mazda RX-7

1991 Mazda RX-7 wheel fitment at a glance

This 1991 Mazda RX-7 is running Volk Racing SE37K Forge in 17x7.5 +35 at all four corners, wrapped in 215/40R17 Kumho Ecsta STX tires.

It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-7 wheel fitment, Volk Racing SE37K Forge on a Mazda RX-7, 17x7.5 +35 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Volk Racing SE37K Forge 17x7.5 +35 specs

The wheels are 17-inch in diameter and 7.5 inches wide with a +35 offset.

A +35 offset on a 7.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Volk Racing SE37K Forge 17x7.5 +35 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

215/40R17 tires on 17x7.5 wheels

The tire size is 215/40R17: a 215 mm section width with a 40 aspect ratio on the 17-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Kumho Ecsta STX. We stock Falken FAL Azenis RT615K+ 215/40R17XL at $188 each in this size, and other 215/40R17 tires through the 215/40R17 tire search.

Searching for 215/40R17 tires on a Mazda RX-7, or the right tire size for 17x7.5 +35 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Mazda RX-7 is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 17x7.5 +35 fit a Mazda RX-7?

Will Volk Racing SE37K Forge 17x7.5 +35 fit a 1991 Mazda RX-7? This owner's answer is yes, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 18x11, 18x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1991 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

Volk Racing SE37K Forge is not something we carry today. For the same look on your RX-7, browse wheels that fit the 1991 Mazda RX-7 in 17-inch sizes near +35 offset; the Mazda RX-7 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1991 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.