1993 Mazda RX-7

1993 Mazda RX-7 wheel fitment at a glance

This 1993 Mazda RX-7 is running Enkei Wheels NT03, staggered: 18x8.5 +20 up front and 18x9.5 +20 in the rear, wrapped in 235/40R18 front and 255/35R18 rear Continental ExtremeContact Sport tires.

It sits on Air Lift Performance lowering springs with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-7 wheel fitment, Enkei Wheels NT03 on a Mazda RX-7, 18x8.5 +20 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Enkei Wheels NT03 18x8.5 +20 specs (staggered)

The wheels are 18-inch in diameter and 8.5 inches wide with a +20 offset up front, and 18-inch by 9.5 inches at +20 in the rear, in the 5x114.3 bolt pattern the Mazda RX-7 uses.

A +20 offset on a 8.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +20 offset on the 9.5-inch wheel keeps the rear in line with the front.

Enkei Wheels NT03 18x8.5 +20 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

235/40R18 / 255/35R18 tires on 18x8.5 wheels

The tire size is 235/40R18 front and 255/35R18 rear: a 235 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Continental ExtremeContact Sport. We stock Lexani LXUHP-207 235/40R18 at $86 each in this size, and other 235/40R18 tires through the 235/40R18 tire search.

Searching for 235/40R18 tires on a Mazda RX-7, or the right tire size for 18x8.5 +20 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from Air Lift Performance lowering springs, the simplest way to close the fender gap on a Mazda RX-7 while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 18x8.5 +20 fit a Mazda RX-7?

Will Enkei Wheels NT03 18x8.5 +20 fit a 1993 Mazda RX-7? This owner's answer is yes, on Air Lift Performance lowering springs, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 17x7.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1993 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

We sell this wheel in the closest size we carry: Enkei NT03+M 5x114.3 18x8.5+38 Silver is $348 each, about $1,882 for the set of four, in stock and ready to ship. Add tires on the product page and it ships as a mounted and balanced Mazda RX-7 wheel and tire package with free shipping.

Financing is available on every set, and 1993 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.