1993 Mazda RX-7

1993 Mazda RX-7 wheel fitment at a glance

This 1993 Mazda RX-7 is running Enkei Wheels RPF1, staggered: 17x9 +45 up front and 17x9.5 +38 in the rear, wrapped in 255/40R17 Continental ExtremeContact Sport tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-7 wheel fitment, Enkei Wheels RPF1 on a Mazda RX-7, 17x9 +45 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Enkei Wheels RPF1 17x9 +45 specs (staggered)

The wheels are 17-inch in diameter and 9 inches wide with a +45 offset up front, and 17-inch by 9.5 inches at +38 in the rear, in the 5x114.3 bolt pattern the Mazda RX-7 uses.

A +45 offset on a 9-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in. The rear +38 offset on the 9.5-inch wheel pushes the rear out further for the staggered look.

Enkei Wheels RPF1 17x9 +45 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

255/40R17 tires on 17x9 wheels

The tire size is 255/40R17: a 255 mm section width with a 40 aspect ratio on the 17-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Continental ExtremeContact Sport. We stock Falken Azenis FK460 A/S 255/40ZR17 98Y - 28105136 at $188 each in this size, and other 255/40R17 tires through the 255/40R17 tire search.

Searching for 255/40R17 tires on a Mazda RX-7, or the right tire size for 17x9 +45 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 17x9 +45 and get the flush look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 17x9 +45 fit a Mazda RX-7?

Will Enkei Wheels RPF1 17x9 +45 fit a 1993 Mazda RX-7? This owner's answer is yes, on coilovers, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 17x7.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1993 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

We sell this exact wheel: Enkei RPF1 5x114.3 17x9+45 Gold is $312 each, about $1,273 for the set of four, in stock and ready to ship. Add tires on the product page and it ships as a mounted and balanced Mazda RX-7 wheel and tire package with free shipping.

Financing is available on every set, and 1993 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.