1993 Mazda RX-7

1993 Mazda RX-7 wheel fitment at a glance

This 1993 Mazda RX-7 is running Work Wheels Meister S1 2P, staggered: 19x9 +30 up front and 20x10.5 +23 in the rear, wrapped in 215/35R19 front and 245/30R20 rear Hankook Ventus V12 EVO2 K120 tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-7 wheel fitment, Work Wheels Meister S1 2P on a Mazda RX-7, 19x9 +30 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Meister S1 2P 19x9 +30 specs (staggered)

The wheels are 19-inch in diameter and 9 inches wide with a +30 offset up front, and 20-inch by 10.5 inches at +23 in the rear, in the 4x100 bolt pattern the Mazda RX-7 uses.

A +30 offset on a 9-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +23 offset on the 10.5-inch wheel pushes the rear out further for the staggered look.

Work Wheels Meister S1 2P 19x9 +30 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

215/35R19 / 245/30R20 tires on 19x9 wheels

The tire size is 215/35R19 front and 245/30R20 rear: a 215 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Hankook Ventus V12 EVO2 K120. We stock Haida HD927 215/35R19 at $109 each in this size, and other 215/35R19 tires through the 215/35R19 tire search.

Searching for 215/35R19 tires on a Mazda RX-7, or the right tire size for 19x9 +30 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 19x9 +30 and get the flush look.

No rubbing at all, front or rear, no spacers, pulled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 19x9 +30 fit a Mazda RX-7?

Will Work Wheels Meister S1 2P 19x9 +30 fit a 1993 Mazda RX-7? This owner's answer is yes, on coilovers, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 17x7.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1993 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

We carry Work Wheels Meister S1 2P, though not yet in 19x9 +30: see the Work Wheels Meister S1 2P sizes we stock, or every wheel that fits the 1993 Mazda RX-7 in sizes close to this one.

Financing is available on every set, and 1993 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.