1994 Mazda RX-7

1994 Mazda RX-7 wheel fitment at a glance

This 1994 Mazda RX-7 is running ESR Wheels SR01, staggered: 19x9 +22 up front and 19x10.5 +22 in the rear, wrapped in 265/30R19 front and 295/30R19 rear Kumho Ecsta AST tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-7 wheel fitment, ESR Wheels SR01 on a Mazda RX-7, 19x9 +22 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

ESR Wheels SR01 19x9 +22 specs (staggered)

The wheels are 19-inch in diameter and 9 inches wide with a +22 offset up front, and 19-inch by 10.5 inches at +22 in the rear, in the 5x108 bolt pattern the Mazda RX-7 uses.

A +22 offset on a 9-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +22 offset on the 10.5-inch wheel keeps the rear in line with the front.

ESR Wheels SR01 19x9 +22 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

265/30R19 / 295/30R19 tires on 19x9 wheels

The tire size is 265/30R19 front and 295/30R19 rear: a 265 mm section width with a 30 aspect ratio on the 19-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Kumho Ecsta AST. We stock Accelera PHI 265/30R19 93Y - 1200000133 at $104 each in this size, and other 265/30R19 tires through the 265/30R19 tire search.

Searching for 265/30R19 tires on a Mazda RX-7, or the right tire size for 19x9 +22 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 19x9 +22 and get the flush look.

No rubbing at all, front or rear, no spacers, pulled and rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 19x9 +22 fit a Mazda RX-7?

Will ESR Wheels SR01 19x9 +22 fit a 1994 Mazda RX-7? This owner's answer is yes, on coilovers, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 17x7.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1994 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

We sell this wheel in the closest size we carry: ESR Wheels SR SERIES SR01 5x108 19x9.5 +22 Hyper Silver is $353 each, about $1,359 for the set of four, in stock and ready to ship. Add tires on the product page and it ships as a mounted and balanced Mazda RX-7 wheel and tire package with free shipping.

Financing is available on every set, and 1994 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.