1994 Mazda RX-7

1994 Mazda RX-7 wheel fitment at a glance

This 1994 Mazda RX-7 is running BBS LM in 19x9.5 +30 at all four corners, wrapped in 235/35R19 front and 255/35R19 rear Falken Azenis RT615K+ tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-7 wheel fitment, BBS LM on a Mazda RX-7, 19x9.5 +30 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

BBS LM 19x9.5 +30 specs

The wheels are 19-inch in diameter and 9.5 inches wide with a +30 offset, in the 5x112 bolt pattern the Mazda RX-7 uses.

A +30 offset on a 9.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

BBS LM 19x9.5 +30 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

235/35R19 / 255/35R19 tires on 19x9.5 wheels

The tire size is 235/35R19 front and 255/35R19 rear: a 235 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Falken Azenis RT615K+. We stock Lexani LX-TWENTY 235/35R19 at $97 each in this size, and other 235/35R19 tires through the 235/35R19 tire search.

Searching for 235/35R19 tires on a Mazda RX-7, or the right tire size for 19x9.5 +30 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 19x9.5 +30 and get the flush look.

No rubbing at all, front or rear, no spacers, pulled and rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 19x9.5 +30 fit a Mazda RX-7?

Will BBS LM 19x9.5 +30 fit a 1994 Mazda RX-7? This owner's answer is yes, on coilovers, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 17x7.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1994 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

We sell this exact wheel: BBS LM 5x112 19x9.5+32 Diamond Black is $1,711 each, about $6,846 for the set of four. Add tires on the product page and it ships as a mounted and balanced Mazda RX-7 wheel and tire package with free shipping.

Financing is available on every set, and 1994 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.