1994 Mazda RX-7

1994 Mazda RX-7 wheel fitment at a glance

This 1994 Mazda RX-7 is running Work Wheels Seeker CX, staggered: 18x10.5 +22 up front and 18x11.5 +22 in the rear, wrapped in 275/35R18 front and 295/35R18 rear Nexen N'Fera SU1 tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-7 wheel fitment, Work Wheels Seeker CX on a Mazda RX-7, 18x10.5 +22 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Seeker CX 18x10.5 +22 specs (staggered)

The wheels are 18-inch in diameter and 10.5 inches wide with a +22 offset up front, and 18-inch by 11.5 inches at +22 in the rear, in the 4x100 bolt pattern the Mazda RX-7 uses.

A +22 offset on a 10.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +22 offset on the 11.5-inch wheel keeps the rear in line with the front.

Work Wheels Seeker CX 18x10.5 +22 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

275/35R18 / 295/35R18 tires on 18x10.5 wheels

The tire size is 275/35R18 front and 295/35R18 rear: a 275 mm section width with a 35 aspect ratio on the 18-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Nexen N'Fera SU1. We stock General G-Max RS 275/35ZR18 95Y - 15492880000 at $242 each in this size, and other 275/35R18 tires through the 275/35R18 tire search.

Searching for 275/35R18 tires on a Mazda RX-7, or the right tire size for 18x10.5 +22 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 18x10.5 +22 and get the flush look.

No rubbing at all, front or rear, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 18x10.5 +22 fit a Mazda RX-7?

Will Work Wheels Seeker CX 18x10.5 +22 fit a 1994 Mazda RX-7? This owner's answer is yes, on coilovers, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 17x7.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1994 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

We sell this exact wheel: Work Seeker Cx 4x100 18x10.5+22 A Disk Matte Black is $603 each, about $2,448 for the set of four. Add tires on the product page and it ships as a mounted and balanced Mazda RX-7 wheel and tire package with free shipping.

Financing is available on every set, and 1994 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.