1993 Mazda RX-7

1993 Mazda RX-7 wheel fitment at a glance

This 1993 Mazda RX-7 is running Volk Racing TE37, staggered: 19x9.5 +22 up front and 19x10.5 +22 in the rear, wrapped in 225/35R19 front and 245/35R19 rear Falken Azenis RT615K+ tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-7 wheel fitment, Volk Racing TE37 on a Mazda RX-7, 19x9.5 +22 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Volk Racing TE37 19x9.5 +22 specs (staggered)

The wheels are 19-inch in diameter and 9.5 inches wide with a +22 offset up front, and 19-inch by 10.5 inches at +22 in the rear, in the 5x114.3 bolt pattern the Mazda RX-7 uses.

A +22 offset on a 9.5-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +22 offset on the 10.5-inch wheel keeps the rear in line with the front.

Volk Racing TE37 19x9.5 +22 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

225/35R19 / 245/35R19 tires on 19x9.5 wheels

The tire size is 225/35R19 front and 245/35R19 rear: a 225 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Falken Azenis RT615K+. We stock Lionhart LH-Five 225/35R19 88W - LHST51935020 at $99 each in this size, and other 225/35R19 tires through the 225/35R19 tire search.

Searching for 225/35R19 tires on a Mazda RX-7, or the right tire size for 19x9.5 +22 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 19x9.5 +22 and get the flush look.

No rubbing at all, front or rear, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 19x9.5 +22 fit a Mazda RX-7?

Will Volk Racing TE37 19x9.5 +22 fit a 1993 Mazda RX-7? This owner's answer is yes, on coilovers, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 17x7.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1993 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

We sell this exact wheel: Volk Racing TE37 Ultra M-Spec 5x114.3 19x9.5+22 is $1,072 each, about $4,532 for the set of four, made to order. Add tires on the product page and it ships as a mounted and balanced Mazda RX-7 wheel and tire package with free shipping.

Financing is available on every set, and 1993 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.