1994 Mazda RX-7

1994 Mazda RX-7 wheel fitment at a glance

This 1994 Mazda RX-7 is running Avant Garde F133 in 18x12 +2 at all four corners, wrapped in 335/30R18 Toyo Proxes Sport tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-7 wheel fitment, Avant Garde F133 on a Mazda RX-7, 18x12 +2 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Avant Garde F133 18x12 +2 specs

The wheels are 18-inch in diameter and 12 inches wide with a +2 offset.

A +2 offset on a 12-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Avant Garde F133 18x12 +2 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

335/30R18 tires on 18x12 wheels

The tire size is 335/30R18: a 335 mm section width with a 30 aspect ratio on the 18-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Toyo Proxes Sport. We stock Continental ExtremeContact Sport 02 335/30R18 102Y - 03125270000 at $569 each in this size, and other 335/30R18 tires through the 335/30R18 tire search.

Searching for 335/30R18 tires on a Mazda RX-7, or the right tire size for 18x12 +2 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 18x12 +2 and get the flush look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 18x12 +2 fit a Mazda RX-7?

Will Avant Garde F133 18x12 +2 fit a 1994 Mazda RX-7? This owner's answer is yes, on coilovers, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 17x7.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1994 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

Avant Garde F133 is not something we carry today. For the same look on your RX-7, browse wheels that fit the 1994 Mazda RX-7 in 18-inch sizes near +2 offset; the Mazda RX-7 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1994 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.