1993 Mazda RX-7

1993 Mazda RX-7 wheel fitment at a glance

This 1993 Mazda RX-7 is running Work Wheels Meister M1 3P, staggered: 19x9 +11 up front and 19x10 -8 in the rear, wrapped in 225/35R19 front and 235/35R19 rear Continental ExtremeContact Sport tires.

It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-7 wheel fitment, Work Wheels Meister M1 3P on a Mazda RX-7, 19x9 +11 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Meister M1 3P 19x9 +11 specs (staggered)

The wheels are 19-inch in diameter and 9 inches wide with a +11 offset up front, and 19-inch by 10 inches at -8 in the rear.

A +11 offset on a 9-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear -8 offset on the 10-inch wheel pushes the rear out further for the staggered look.

Work Wheels Meister M1 3P 19x9 +11 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

225/35R19 / 235/35R19 tires on 19x9 wheels

The tire size is 225/35R19 front and 235/35R19 rear: a 225 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Continental ExtremeContact Sport. We stock Lionhart LH-Five 225/35R19 88W - LHST51935020 at $99 each in this size, and other 225/35R19 tires through the 225/35R19 tire search.

Searching for 225/35R19 tires on a Mazda RX-7, or the right tire size for 19x9 +11 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Mazda RX-7 is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, 10mm spacers, overfenders or a widebody. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 19x9 +11 fit a Mazda RX-7?

Will Work Wheels Meister M1 3P 19x9 +11 fit a 1993 Mazda RX-7? This owner's answer is yes, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 17x7.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1993 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

Work Wheels Meister M1 3P is not something we carry today. For the same look on your RX-7, browse wheels that fit the 1993 Mazda RX-7 in 19-inch sizes near +11 offset; the Mazda RX-7 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1993 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.