1993 Mazda RX-7

1993 Mazda RX-7 wheel fitment at a glance

This 1993 Mazda RX-7 is running BBS LM, staggered: 17x11 +35 up front and 17x12 +18 in the rear, wrapped in 235/45R17 front and 275/40R17 rear BF Goodrich G-Force Comp-2 A/S Plus tires.

It sits on lowering springs with a poke stance, meaning the wheels stick out past the fender.

If you are searching for Mazda RX-7 wheel fitment, BBS LM on a Mazda RX-7, 17x11 +35 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

BBS LM 17x11 +35 specs (staggered)

The wheels are 17-inch in diameter and 11 inches wide with a +35 offset up front, and 17-inch by 12 inches at +18 in the rear, in the 5x130 bolt pattern the Mazda RX-7 uses.

A +35 offset on a 11-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +18 offset on the 12-inch wheel pushes the rear out further for the staggered look.

BBS LM 17x11 +35 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

235/45R17 / 275/40R17 tires on 17x11 wheels

The tire size is 235/45R17 front and 275/40R17 rear: a 235 mm section width with a 45 aspect ratio on the 17-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose BF Goodrich G-Force Comp-2 A/S Plus. We stock Lexani LXUHP-207 235/45R17 at $88 each in this size, and other 235/45R17 tires through the 235/45R17 tire search.

Searching for 235/45R17 tires on a Mazda RX-7, or the right tire size for 17x11 +35 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from lowering springs, the simplest way to close the fender gap on a Mazda RX-7 while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: poke. The wheels stick out past the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 17x11 +35 fit a Mazda RX-7?

Will BBS LM 17x11 +35 fit a 1993 Mazda RX-7? This owner's answer is yes, on lowering springs, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 17x7.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1993 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

We sell this wheel in the closest size we carry: BBS LM 5x130 17x9.0+17 Diamond Silver is $1,249 each, about $4,995 for the set of four. Add tires on the product page and it ships as a mounted and balanced Mazda RX-7 wheel and tire package with free shipping.

Financing is available on every set, and 1993 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.