1994 Mazda RX-7

1994 Mazda RX-7 wheel fitment at a glance

This 1994 Mazda RX-7 is running Work Wheels VS-KF, staggered: 18x9 +13 up front and 18x10 +7 in the rear, wrapped in 215/35R18 front and 235/40R18 rear Falken Ziex S/TZ05 tires.

It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Mazda RX-7 wheel fitment, Work Wheels VS-KF on a Mazda RX-7, 18x9 +13 wheels on a RX-7, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels VS-KF 18x9 +13 specs (staggered)

The wheels are 18-inch in diameter and 9 inches wide with a +13 offset up front, and 18-inch by 10 inches at +7 in the rear.

A +13 offset on a 9-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +7 offset on the 10-inch wheel pushes the rear out further for the staggered look.

Work Wheels VS-KF 18x9 +13 on a Mazda RX-7 is a common RX-7 question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

215/35R18 / 235/40R18 tires on 18x9 wheels

The tire size is 215/35R18 front and 235/40R18 rear: a 215 mm section width with a 35 aspect ratio on the 18-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Falken Ziex S/TZ05. We stock Lexani LXUHP-207 215/35R18 at $81 each in this size, and other 215/35R18 tires through the 215/35R18 tire search.

Searching for 215/35R18 tires on a Mazda RX-7, or the right tire size for 18x9 +13 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Mazda RX-7 is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Mazda RX-7 comes down to the offset and width above; copy them and you get the same result.

Will 18x9 +13 fit a Mazda RX-7?

Will Work Wheels VS-KF 18x9 +13 fit a 1994 Mazda RX-7? This owner's answer is yes, with no rubbing.

6 other Mazda RX-7 builds in the gallery run sizes like 18x10 / 18x11, 18x9.5, 17x9 / 17x10, 17x7.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Mazda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1994 Mazda RX-7: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Mazda RX-7

Work Wheels VS-KF is not something we carry today. For the same look on your RX-7, browse wheels that fit the 1994 Mazda RX-7 in 18-inch sizes near +13 offset; the Mazda RX-7 wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1994 Mazda RX-7 wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Mazda RX-7 and size before you order, and add your own ride once it is done so the next owner can see what fits.