1990 Nissan 240SX

1990 Nissan 240SX wheel fitment at a glance

This 1990 Nissan 240SX is running SSR Wheels Professor SP1, staggered: 18x9 +3 up front and 18x10 +11 in the rear, wrapped in 215/40R18 front and 245/35R18 rear Hankook Ventus S1 EVO2 K117B tires.

It sits on coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Nissan 240SX wheel fitment, SSR Wheels Professor SP1 on a Nissan 240SX, 18x9 +3 wheels on a 240SX, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

SSR Wheels Professor SP1 18x9 +3 specs (staggered)

The wheels are 18-inch in diameter and 9 inches wide with a +3 offset up front, and 18-inch by 10 inches at +11 in the rear, in the 4x100 bolt pattern the Nissan 240SX uses.

A +3 offset on a 9-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +11 offset on the 10-inch wheel keeps the rear in line with the front.

SSR Wheels Professor SP1 18x9 +3 on a Nissan 240SX is a common 240SX question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

215/40R18 / 245/35R18 tires on 18x9 wheels

The tire size is 215/40R18 front and 245/35R18 rear: a 215 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Hankook Ventus S1 EVO2 K117B. We stock Lexani LXUHP-207 215/40R18 at $87 each in this size, and other 215/40R18 tires through the 215/40R18 tire search.

Searching for 215/40R18 tires on a Nissan 240SX, or the right tire size for 18x9 +3 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 18x9 +3 and get the flush look.

No rubbing at all, front or rear, 3mm spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Nissan 240SX comes down to the offset and width above; copy them and you get the same result.

Will 18x9 +3 fit a Nissan 240SX?

Will SSR Wheels Professor SP1 18x9 +3 fit a 1990 Nissan 240SX? This owner's answer is yes, on coilovers, with no rubbing.

6 other Nissan 240SX builds in the gallery run sizes like 17x11, 17x10.5 / 17x11, 17x10.5, 16x7.5, 18x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1990 Nissan 240SX: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan 240SX

We sell this exact wheel: SSR Professor SP1 4X100 18X9+3 MD Disk Black is $912 each, about $3,686 for the set of four, made to order. Add tires on the product page and it ships as a mounted and balanced Nissan 240SX wheel and tire package with free shipping.

Financing is available on every set, and 1990 Nissan 240SX wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan 240SX and size before you order, and add your own ride once it is done so the next owner can see what fits.