1991 Nissan 240SX

1991 Nissan 240SX wheel fitment at a glance

This 1991 Nissan 240SX is running Work Wheels Meister S1 3P, staggered: 18x9.5 -3 up front and 18x11.5 -22 in the rear, wrapped in 225/40R18 front and 275/35R18 rear Toyo T1R tires.

It sits on stock suspension with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Nissan 240SX wheel fitment, Work Wheels Meister S1 3P on a Nissan 240SX, 18x9.5 -3 wheels on a 240SX, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Meister S1 3P 18x9.5 -3 specs (staggered)

The wheels are 18-inch in diameter and 9.5 inches wide with a -3 offset up front, and 18-inch by 11.5 inches at -22 in the rear.

A -3 offset on a 9.5-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear -22 offset on the 11.5-inch wheel pushes the rear out further for the staggered look.

Work Wheels Meister S1 3P 18x9.5 -3 on a Nissan 240SX is a common 240SX question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

225/40R18 / 275/35R18 tires on 18x9.5 wheels

The tire size is 225/40R18 front and 275/35R18 rear: a 225 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Toyo T1R. We stock Ironman IRON iMOVE Gen 3 AS 225/40ZR18XL at $89 each in this size, and other 225/40R18 tires through the 225/40R18 tire search.

Searching for 225/40R18 tires on a Nissan 240SX, or the right tire size for 18x9.5 -3 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Nissan 240SX is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, pulled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Nissan 240SX comes down to the offset and width above; copy them and you get the same result.

Will 18x9.5 -3 fit a Nissan 240SX?

Will Work Wheels Meister S1 3P 18x9.5 -3 fit a 1991 Nissan 240SX? This owner's answer is yes, with no rubbing.

6 other Nissan 240SX builds in the gallery run sizes like 17x11, 17x10.5 / 17x11, 17x10.5, 16x7.5, 18x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1991 Nissan 240SX: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan 240SX

Work Wheels Meister S1 3P is not something we carry today. For the same look on your 240SX, browse wheels that fit the 1991 Nissan 240SX in 18-inch sizes near -3 offset; the Nissan 240SX wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1991 Nissan 240SX wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan 240SX and size before you order, and add your own ride once it is done so the next owner can see what fits.