1992 Nissan 240SX

1992 Nissan 240SX wheel fitment at a glance

This 1992 Nissan 240SX is running Diamond Racing Wheels Racing Pro Street, staggered: 15x8 +0 up front and 16x10 +12 in the rear, wrapped in 205/45R15 front and 225/45R16 rear Toyo Proxes R888R tires.

It sits on stock suspension with a poke stance, meaning the wheels stick out past the fender.

If you are searching for Nissan 240SX wheel fitment, Diamond Racing Wheels Racing Pro Street on a Nissan 240SX, 15x8 +0 wheels on a 240SX, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Diamond Racing Wheels Racing Pro Street 15x8 +0 specs (staggered)

The wheels are 15-inch in diameter and 8 inches wide with a +0 offset up front, and 16-inch by 10 inches at +12 in the rear.

A +0 offset on a 8-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +12 offset on the 10-inch wheel keeps the rear in line with the front.

Diamond Racing Wheels Racing Pro Street 15x8 +0 on a Nissan 240SX is a common 240SX question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

205/45R15 / 225/45R16 tires on 15x8 wheels

The tire size is 205/45R15 front and 225/45R16 rear: a 205 mm section width with a 45 aspect ratio on the 15-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Toyo Proxes R888R. See every 205/45R15 tire we carry for this size.

Searching for 205/45R15 tires on a Nissan 240SX, or the right tire size for 15x8 +0 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Nissan 240SX is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: poke. The wheels stick out past the fender. Flush fitment on a Nissan 240SX comes down to the offset and width above; copy them and you get the same result.

Will 15x8 +0 fit a Nissan 240SX?

Will Diamond Racing Wheels Racing Pro Street 15x8 +0 fit a 1992 Nissan 240SX? This owner's answer is yes, with no rubbing.

6 other Nissan 240SX builds in the gallery run sizes like 17x11, 17x10.5 / 17x11, 17x10.5, 16x7.5, 18x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1992 Nissan 240SX: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan 240SX

Diamond Racing Wheels Racing Pro Street is not something we carry today. For the same look on your 240SX, browse wheels that fit the 1992 Nissan 240SX in 15-inch sizes near +0 offset; the Nissan 240SX wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1992 Nissan 240SX wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan 240SX and size before you order, and add your own ride once it is done so the next owner can see what fits.