1993 Nissan 240SX

1993 Nissan 240SX wheel fitment at a glance

This 1993 Nissan 240SX is running Rota Wheels RB, staggered: 16x8 +15 up front and 16x8 -10 in the rear, wrapped in 205/50R16 Falken ZEIX 912 tires.

It sits on lowering springs with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Nissan 240SX wheel fitment, Rota Wheels RB on a Nissan 240SX, 16x8 +15 wheels on a 240SX, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Rota Wheels RB 16x8 +15 specs (staggered)

The wheels are 16-inch in diameter and 8 inches wide with a +15 offset up front, and 16-inch by 8 inches at -10 in the rear.

A +15 offset on a 8-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear -10 offset on the 8-inch wheel pushes the rear out further for the staggered look.

Rota Wheels RB 16x8 +15 on a Nissan 240SX is a common 240SX question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

205/50R16 tires on 16x8 wheels

The tire size is 205/50R16: a 205 mm section width with a 50 aspect ratio on the 16-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Falken ZEIX 912. We stock Ironman iMOVE PT PLUS 205/50R16 87V - 98857 at $77 each in this size, and other 205/50R16 tires through the 205/50R16 tire search.

Searching for 205/50R16 tires on a Nissan 240SX, or the right tire size for 16x8 +15 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from lowering springs, the simplest way to close the fender gap on a Nissan 240SX while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Nissan 240SX comes down to the offset and width above; copy them and you get the same result.

Will 16x8 +15 fit a Nissan 240SX?

Will Rota Wheels RB 16x8 +15 fit a 1993 Nissan 240SX? This owner's answer is yes, on lowering springs, with no rubbing.

6 other Nissan 240SX builds in the gallery run sizes like 17x11, 17x10.5 / 17x11, 17x10.5, 16x7.5, 18x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1993 Nissan 240SX: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan 240SX

Rota Wheels RB is not something we carry today. For the same look on your 240SX, browse wheels that fit the 1993 Nissan 240SX in 16-inch sizes near +15 offset; the Nissan 240SX wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1993 Nissan 240SX wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan 240SX and size before you order, and add your own ride once it is done so the next owner can see what fits.