1993 Nissan 240SX

1993 Nissan 240SX wheel fitment at a glance

This 1993 Nissan 240SX is running Work Wheels Equip 05, staggered: 17x9 +16 up front and 17x10 +18 in the rear, wrapped in 215/45R17 front and 235/40R17 rear Federal SS595 tires.

It sits on lowering springs with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Nissan 240SX wheel fitment, Work Wheels Equip 05 on a Nissan 240SX, 17x9 +16 wheels on a 240SX, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Equip 05 17x9 +16 specs (staggered)

The wheels are 17-inch in diameter and 9 inches wide with a +16 offset up front, and 17-inch by 10 inches at +18 in the rear.

A +16 offset on a 9-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +18 offset on the 10-inch wheel keeps the rear in line with the front.

Work Wheels Equip 05 17x9 +16 on a Nissan 240SX is a common 240SX question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

215/45R17 / 235/40R17 tires on 17x9 wheels

The tire size is 215/45R17 front and 235/40R17 rear: a 215 mm section width with a 45 aspect ratio on the 17-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Federal SS595. We stock Ironman IRON iMOVE Gen 3 AS 215/45ZR17XL at $82 each in this size, and other 215/45R17 tires through the 215/45R17 tire search.

Searching for 215/45R17 tires on a Nissan 240SX, or the right tire size for 17x9 +16 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from lowering springs, the simplest way to close the fender gap on a Nissan 240SX while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Nissan 240SX comes down to the offset and width above; copy them and you get the same result.

Will 17x9 +16 fit a Nissan 240SX?

Will Work Wheels Equip 05 17x9 +16 fit a 1993 Nissan 240SX? This owner's answer is yes, on lowering springs, with no rubbing.

6 other Nissan 240SX builds in the gallery run sizes like 17x11, 17x10.5 / 17x11, 17x10.5, 16x7.5, 18x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Nissan builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1993 Nissan 240SX: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Nissan 240SX

Work Wheels Equip 05 is not something we carry today. For the same look on your 240SX, browse wheels that fit the 1993 Nissan 240SX in 17-inch sizes near +16 offset; the Nissan 240SX wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1993 Nissan 240SX wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Nissan 240SX and size before you order, and add your own ride once it is done so the next owner can see what fits.