2018 Subaru WRX

2018 Subaru WRX wheel fitment at a glance

This 2018 Subaru WRX is running Work Wheels Meister M1 3P, staggered: 18x11.5 +4 up front and 18x11.5 +7 in the rear, wrapped in 295/30R18 Toyo Proxes R888R tires.

It sits on lowering springs with a tucked stance, meaning the wheels sit inside the fender line.

If you are searching for Subaru WRX wheel fitment, Work Wheels Meister M1 3P on a Subaru WRX, 18x11.5 +4 wheels on a WRX, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels Meister M1 3P 18x11.5 +4 specs (staggered)

The wheels are 18-inch in diameter and 11.5 inches wide with a +4 offset up front, and 18-inch by 11.5 inches at +7 in the rear.

A +4 offset on a 11.5-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +7 offset on the 11.5-inch wheel keeps the rear in line with the front.

Work Wheels Meister M1 3P 18x11.5 +4 on a Subaru WRX is a common WRX question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

295/30R18 tires on 18x11.5 wheels

The tire size is 295/30R18: a 295 mm section width with a 30 aspect ratio on the 18-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Toyo Proxes R888R. We stock Falken Azenis FK510 295/30ZR18XL 98(Y) - 28035523 at $285 each in this size, and other 295/30R18 tires through the 295/30R18 tire search.

Searching for 295/30R18 tires on a Subaru WRX, or the right tire size for 18x11.5 +4 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The drop comes from lowering springs, the simplest way to close the fender gap on a Subaru WRX while keeping the factory shocks.

No rubbing at all, front or rear, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: tucked. The wheels sit inside the fender line. Flush fitment on a Subaru WRX comes down to the offset and width above; copy them and you get the same result.

Will 18x11.5 +4 fit a Subaru WRX?

Will Work Wheels Meister M1 3P 18x11.5 +4 fit a 2018 Subaru WRX? This owner's answer is yes, on lowering springs, with no rubbing.

6 other Subaru WRX builds in the gallery run sizes like 19x9.5, 18x9.5, 18x11, so you can compare offsets, tire sizes and suspension before you order. See all Subaru builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2018 Subaru WRX: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Subaru WRX

Work Wheels Meister M1 3P is not something we carry today. For the same look on your WRX, browse wheels that fit the 2018 Subaru WRX in 18-inch sizes near +4 offset; the Subaru WRX wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2018 Subaru WRX wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Subaru WRX and size before you order, and add your own ride once it is done so the next owner can see what fits.