2016 Ford Focus

2016 Ford Focus wheel fitment at a glance

This 2016 Ford Focus is running Work Wheels VS-XX in 18x10 +23 at all four corners, wrapped in 215/40R18 Toyo Proxes Sport A/S tires.

It sits on BC Racing coilovers with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Ford Focus wheel fitment, Work Wheels VS-XX on a Ford Focus, 18x10 +23 wheels on a Focus, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels VS-XX 18x10 +23 specs

The wheels are 18-inch in diameter and 10 inches wide with a +23 offset.

A +23 offset on a 10-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Work Wheels VS-XX 18x10 +23 on a Ford Focus is a common Focus question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

215/40R18 tires on 18x10 wheels

The tire size is 215/40R18: a 215 mm section width with a 40 aspect ratio on the 18-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Toyo Proxes Sport A/S. We stock Lexani LXUHP-207 215/40R18 at $87 each in this size, and other 215/40R18 tires through the 215/40R18 tire search.

Searching for 215/40R18 tires on a Ford Focus, or the right tire size for 18x10 +23 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on BC Racing coilovers, which lets the owner dial in ride height and camber to clear 18x10 +23 and get the nearly flush look.

No rubbing at all, front or rear, no spacers, modified inner fender liners. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Ford Focus comes down to the offset and width above; copy them and you get the same result.

Will 18x10 +23 fit a Ford Focus?

Will Work Wheels VS-XX 18x10 +23 fit a 2016 Ford Focus? This owner's answer is yes, on BC Racing coilovers, with no rubbing.

6 other Ford Focus builds in the gallery run sizes like 18x9.5, 19x8.5, 18x8.5, 18x9, so you can compare offsets, tire sizes and suspension before you order. See all Ford builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2016 Ford Focus: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Ford Focus

Work Wheels VS-XX is not something we carry today. For the same look on your Focus, browse wheels that fit the 2016 Ford Focus in 18-inch sizes near +23 offset; the Ford Focus wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2016 Ford Focus wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @Kasprst. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Ford Focus and size before you order, and add your own ride once it is done so the next owner can see what fits.