2013 Hyundai Genesis Coupe

2013 Hyundai Genesis Coupe wheel fitment at a glance

This 2013 Hyundai Genesis Coupe is running InCurve Wheels IC-S5, staggered: 20x9 +20 up front and 20x10.5 +25 in the rear, wrapped in 245/30R20 front and 275/30R20 rear Achilles Sport tires.

It sits on BC Racing BR-Type coilovers with a flush stance, meaning the wheel face lines up with the fender.

If you are searching for Hyundai Genesis Coupe wheel fitment, InCurve Wheels IC-S5 on a Hyundai Genesis Coupe, 20x9 +20 wheels on a Genesis Coupe, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

InCurve Wheels IC-S5 20x9 +20 specs (staggered)

The wheels are 20-inch in diameter and 9 inches wide with a +20 offset up front, and 20-inch by 10.5 inches at +25 in the rear.

A +20 offset on a 9-inch wide wheel puts the wheel face in an aggressive position close to the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +25 offset on the 10.5-inch wheel keeps the rear in line with the front.

InCurve Wheels IC-S5 20x9 +20 on a Hyundai Genesis Coupe is a common Genesis Coupe question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/30R20 / 275/30R20 tires on 20x9 wheels

The tire size is 245/30R20 front and 275/30R20 rear: a 245 mm section width with a 30 aspect ratio on the 20-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

The owner chose Achilles Sport. We stock Venom Power Ragnarok GTS 245/30R20 at $105 each in this size, and other 245/30R20 tires through the 245/30R20 tire search.

Searching for 245/30R20 tires on a Hyundai Genesis Coupe, or the right tire size for 20x9 +20 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on BC Racing BR-Type coilovers, which lets the owner dial in ride height and camber to clear 20x9 +20 and get the flush look.

No rubbing at all, front or rear, no spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: flush. The wheel face lines up with the fender. Flush fitment on a Hyundai Genesis Coupe comes down to the offset and width above; copy them and you get the same result.

Will 20x9 +20 fit a Hyundai Genesis Coupe?

Will InCurve Wheels IC-S5 20x9 +20 fit a 2013 Hyundai Genesis Coupe? This owner's answer is yes, on BC Racing BR-Type coilovers, with no rubbing.

6 other Hyundai Genesis Coupe builds in the gallery run sizes like 18x11 / 18x13, 18x8.5, 19x9.5 / 19x10.5, 20x9 / 20x10, 19x9.5 / 16x7, so you can compare offsets, tire sizes and suspension before you order. See all Hyundai builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2013 Hyundai Genesis Coupe: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Hyundai Genesis Coupe

InCurve Wheels IC-S5 is not something we carry today. For the same look on your Genesis Coupe, browse wheels that fit the 2013 Hyundai Genesis Coupe in 20-inch sizes near +20 offset; the Hyundai Genesis Coupe wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2013 Hyundai Genesis Coupe wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Hyundai Genesis Coupe and size before you order, and add your own ride once it is done so the next owner can see what fits.