Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
HRE FF01 19x8.5 +50 / 19x10 +40 255/35R19 / 285/35R19 Stock suspension Tucked stance
2013 Porsche Boxster
This 2013 Porsche Boxster is running HRE FF01, staggered: 19x8.5 +50 up front and 19x10 +40 in the rear, wrapped in 255/35R19 front and 285/35R19 rear tires.
It sits on stock suspension with a tucked stance, meaning the wheels sit inside the fender line.
If you are searching for Porsche Boxster wheel fitment, HRE FF01 on a Porsche Boxster, 19x8.5 +50 wheels on a Boxster, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.
The wheels are 19-inch in diameter and 8.5 inches wide with a +50 offset up front, and 19-inch by 10 inches at +40 in the rear.
A +50 offset on a 8.5-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in. The rear +40 offset on the 10-inch wheel pushes the rear out further for the staggered look.
HRE FF01 19x8.5 +50 on a Porsche Boxster is a common Boxster question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.
The tire size is 255/35R19 front and 285/35R19 rear: a 255 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).
We stock Ironman IRON iMOVE Gen 3 AS 255/35ZR19XL at $124 each in 255/35R19, and more 255/35R19 tires through the tire search.
Searching for 255/35R19 tires on a Porsche Boxster, or the right tire size for 19x8.5 +50 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.
This Porsche Boxster is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.
No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.
Stance: tucked. The wheels sit inside the fender line. Flush fitment on a Porsche Boxster comes down to the offset and width above; copy them and you get the same result.
Will HRE FF01 19x8.5 +50 fit a 2013 Porsche Boxster? This owner's answer is yes, with no rubbing.
2 other Porsche Boxster builds in the gallery run sizes like 19x8.5 / 19x10, 19x9 / 19x11, 20x9, so you can compare offsets, tire sizes and suspension before you order. See all Porsche builds.
Our fitment guarantee covers wheels bought through wheels that fit the 2013 Porsche Boxster: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.
HRE FF01 is not something we carry today. For the same look on your Boxster, browse wheels that fit the 2013 Porsche Boxster in 19-inch sizes near +50 offset; the Porsche Boxster wheel and tire packages there ship mounted and balanced.
Financing is available on every set, and 2013 Porsche Boxster wheels ship free when bought as a wheel and tire package.
Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Porsche Boxster and size before you order, and add your own ride once it is done so the next owner can see what fits.
