2020 Honda Accord

2020 Honda Accord wheel fitment at a glance

This 2020 Honda Accord is running Work Wheels EMITZ in 19x11 +0 at all four corners, wrapped in 235/35R19 Achilles 868 AS tires.

It sits on Air Lift Performance air suspension with a tucked stance, meaning the wheels sit inside the fender line.

If you are searching for Honda Accord wheel fitment, Work Wheels EMITZ on a Honda Accord, 19x11 +0 wheels on a Accord, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

Work Wheels EMITZ 19x11 +0 specs

The wheels are 19-inch in diameter and 11 inches wide with a +0 offset, in the 5x100 bolt pattern the Honda Accord uses.

A +0 offset on a 11-inch wide wheel puts the wheel face in a very aggressive position at or past the fender. Lower offset moves the wheel outward; higher offset tucks it in.

Work Wheels EMITZ 19x11 +0 on a Honda Accord is a common Accord question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

235/35R19 tires on 19x11 wheels

The tire size is 235/35R19: a 235 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a stretched fit (the tire is narrower than the wheel, which pulls the sidewall in and helps clear the fender).

The owner chose Achilles 868 AS. We stock Lexani LX-TWENTY 235/35R19 at $97 each in this size, and other 235/35R19 tires through the 235/35R19 tire search.

Searching for 235/35R19 tires on a Honda Accord, or the right tire size for 19x11 +0 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

It rides on Air Lift Performance air suspension, so it can lay low parked and raise up to drive.

No rubbing at all, front or rear, 15mm spacers, rolled fenders. Rolling or pulling the fender is what most owners do once the wheel sits this close; it keeps the tire from catching the lip over bumps.

Stance: tucked. The wheels sit inside the fender line. Flush fitment on a Honda Accord comes down to the offset and width above; copy them and you get the same result.

Will 19x11 +0 fit a Honda Accord?

Will Work Wheels EMITZ 19x11 +0 fit a 2020 Honda Accord? This owner's answer is yes, on Air Lift Performance air suspension, with no rubbing.

6 other Honda Accord builds in the gallery run sizes like 19x9.5, 18x9.5, 19x12.5 / 19x13.5, 19x11.5, so you can compare offsets, tire sizes and suspension before you order. See all Honda builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2020 Honda Accord: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Honda Accord

We sell this exact wheel: Work Emitz Black Polish 5x100 19x11.0 +0 is $965 each, about $3,860 for the set of four, made to order. Add tires on the product page and it ships as a mounted and balanced Honda Accord wheel and tire package with free shipping.

Financing is available on every set, and 2020 Honda Accord wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @10thgenmarkiee_. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Honda Accord and size before you order, and add your own ride once it is done so the next owner can see what fits.