Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
Free Shipping on All Wheel & Tire Packages
Questions? Call or text our team 813-535-5801
Method 318 Machined 18x8.5 +40 275/70R18 Bilstein 5100s on 1st perch setting front, Apache Offroad 1/2" rear spacer coilovers Nearly flush stance
2025 Toyota Tacoma
This 2025 Toyota Tacoma is running Method 318 Machined in 18x8.5 +40 at all four corners, wrapped in 275/70R18 tires.
It sits on Bilstein 5100s on 1st perch setting front, Apache Offroad 1/2" rear spacer coilovers with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.
If you are searching for Toyota Tacoma wheel fitment, Method 318 Machined on a Toyota Tacoma, 18x8.5 +40 wheels on a Tacoma, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.
The wheels are 18-inch in diameter and 8.5 inches wide with a +40 offset.
A +40 offset on a 8.5-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.
Method 318 Machined 18x8.5 +40 on a Toyota Tacoma is a common Tacoma question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.
The tire size is 275/70R18: a 275 mm section width with a 70 aspect ratio on the 18-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).
We stock Ironman IRON All Country CHT LT275/70R18/10 at $213 each in 275/70R18, and more 275/70R18 tires through the tire search.
Searching for 275/70R18 tires on a Toyota Tacoma, or the right tire size for 18x8.5 +40 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.
The car is lowered on Bilstein 5100s on 1st perch setting front, Apache Offroad 1/2" rear spacer coilovers, which lets the owner dial in ride height and camber to clear 18x8.5 +40 and get the nearly flush look.
No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.
Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Toyota Tacoma comes down to the offset and width above; copy them and you get the same result.
Will Method 318 Machined 18x8.5 +40 fit a 2025 Toyota Tacoma? This owner's answer is yes, on Bilstein 5100s on 1st perch setting front, Apache Offroad 1/2" rear spacer coilovers, with no rubbing.
6 other Toyota Tacoma builds in the gallery run sizes like 17x9, 17x7, 17x8 / 17x7, 17x8.5, so you can compare offsets, tire sizes and suspension before you order. See all Toyota builds.
Our fitment guarantee covers wheels bought through wheels that fit the 2025 Toyota Tacoma: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.
Method 318 Machined is not something we carry today. For the same look on your Tacoma, browse wheels that fit the 2025 Toyota Tacoma in 18-inch sizes near +40 offset; the Toyota Tacoma wheel and tire packages there ship mounted and balanced.
Financing is available on every set, and 2025 Toyota Tacoma wheels ship free when bought as a wheel and tire package.
Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Toyota Tacoma and size before you order, and add your own ride once it is done so the next owner can see what fits.
