1985 Chevrolet Corvette

1985 Chevrolet Corvette wheel fitment at a glance

This 1985 Chevrolet Corvette is running MRR Wheels FS01, staggered: 19x9.5 +56 up front and 20x11 +56 in the rear, wrapped in 275/35R19 front and 305/30R20 rear Nitto NT555 G2 tires.

It sits on stock suspension with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Chevrolet Corvette wheel fitment, MRR Wheels FS01 on a Chevrolet Corvette, 19x9.5 +56 wheels on a Corvette, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

MRR Wheels FS01 19x9.5 +56 specs (staggered)

The wheels are 19-inch in diameter and 9.5 inches wide with a +56 offset up front, and 20-inch by 11 inches at +56 in the rear.

A +56 offset on a 9.5-inch wide wheel puts the wheel face in a conservative, factory-like position. Lower offset moves the wheel outward; higher offset tucks it in. The rear +56 offset on the 11-inch wheel keeps the rear in line with the front.

MRR Wheels FS01 19x9.5 +56 on a Chevrolet Corvette is a common Corvette question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

275/35R19 / 305/30R20 tires on 19x9.5 wheels

The tire size is 275/35R19 front and 305/30R20 rear: a 275 mm section width with a 35 aspect ratio on the 19-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Nitto NT555 G2. We stock Ironman iMOVE Sport G2 275/35ZR19XL 100Y - 98991.1 at $143 each in this size, and other 275/35R19 tires through the 275/35R19 tire search.

Searching for 275/35R19 tires on a Chevrolet Corvette, or the right tire size for 19x9.5 +56 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Chevrolet Corvette is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Chevrolet Corvette comes down to the offset and width above; copy them and you get the same result.

Will 19x9.5 +56 fit a Chevrolet Corvette?

Will MRR Wheels FS01 19x9.5 +56 fit a 1985 Chevrolet Corvette? This owner's answer is yes, with no rubbing.

6 other Chevrolet Corvette builds in the gallery run sizes like 18x9 / 19x10.5, 19x11 / 19x12.5, 18x9.5, 19x10.5 / 20x13, 19x9.5 / 19x10.5, so you can compare offsets, tire sizes and suspension before you order. See all Chevrolet builds.

Our fitment guarantee covers wheels bought through wheels that fit the 1985 Chevrolet Corvette: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Chevrolet Corvette

MRR Wheels FS01 is not something we carry today. For the same look on your Corvette, browse wheels that fit the 1985 Chevrolet Corvette in 19-inch sizes near +56 offset; the Chevrolet Corvette wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 1985 Chevrolet Corvette wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @mrrwheels. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Chevrolet Corvette and size before you order, and add your own ride once it is done so the next owner can see what fits.