2021 Ford Mustang

2021 Ford Mustang wheel fitment at a glance

This 2021 Ford Mustang is running MRR FS06 in 19x10 +35 at all four corners, wrapped in 295/30R19 Hoosier R7 tires.

It sits on coilovers with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Ford Mustang wheel fitment, MRR FS06 on a Ford Mustang, 19x10 +35 wheels on a Mustang, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

MRR FS06 19x10 +35 specs

The wheels are 19-inch in diameter and 10 inches wide with a +35 offset.

A +35 offset on a 10-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in.

MRR FS06 19x10 +35 on a Ford Mustang is a common Mustang question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

295/30R19 tires on 19x10 wheels

The tire size is 295/30R19: a 295 mm section width with a 30 aspect ratio on the 19-inch wheel, which gives a meaty fit (the tire is wider than the wheel, so the sidewall bulges a little and gives more cushion).

The owner chose Hoosier R7. We stock General Tire GEN G-MAX RS 295/30ZR19XL at $313 each in this size, and other 295/30R19 tires through the 295/30R19 tire search.

Searching for 295/30R19 tires on a Ford Mustang, or the right tire size for 19x10 +35 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

The car is lowered on coilovers, which lets the owner dial in ride height and camber to clear 19x10 +35 and get the nearly flush look.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Ford Mustang comes down to the offset and width above; copy them and you get the same result.

Will 19x10 +35 fit a Ford Mustang?

Will MRR FS06 19x10 +35 fit a 2021 Ford Mustang? This owner's answer is yes, on coilovers, with no rubbing.

6 other Ford Mustang builds in the gallery run sizes like 20x10.5, 20x9 / 20x10, 20x9 / 20x10.5, 20x9.5 / 20x11, so you can compare offsets, tire sizes and suspension before you order. See all Ford builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2021 Ford Mustang: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Ford Mustang

MRR FS06 is not something we carry today. For the same look on your Mustang, browse wheels that fit the 2021 Ford Mustang in 19-inch sizes near +35 offset; the Ford Mustang wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2021 Ford Mustang wheels ship free when bought as a wheel and tire package.

About this build

Build and photos by @mrrwheels. Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Ford Mustang and size before you order, and add your own ride once it is done so the next owner can see what fits.