2011 Audi TTS Quattro

2011 Audi TTS Quattro wheel fitment at a glance

This 2011 Audi TTS Quattro is running BC Forged HCA, staggered: 20x9 +42 up front and 20x9.5 +35 in the rear, wrapped in 245/30R20 tires.

It sits on stock suspension with a nearly flush stance, meaning the wheel face sits a touch inside the fender line.

If you are searching for Audi TTS Quattro wheel fitment, BC Forged HCA on a Audi TTS Quattro, 20x9 +42 wheels on a TTS Quattro, or what tire size goes with that setup, this build is a real-world answer, photographed and measured by the owner.

BC Forged HCA 20x9 +42 specs (staggered)

The wheels are 20-inch in diameter and 9 inches wide with a +42 offset up front, and 20-inch by 9.5 inches at +35 in the rear.

A +42 offset on a 9-inch wide wheel puts the wheel face in a mild push toward the fender. Lower offset moves the wheel outward; higher offset tucks it in. The rear +35 offset on the 9.5-inch wheel pushes the rear out further for the staggered look.

BC Forged HCA 20x9 +42 on a Audi TTS Quattro is a common TTS Quattro question, and this page shows exactly how it sits, how it clears, and what the owner changed to make it work.

245/30R20 tires on 20x9 wheels

The tire size is 245/30R20: a 245 mm section width with a 30 aspect ratio on the 20-inch wheel, which gives a square fit (tire and wheel are about the same width, the clean look most people go for).

We stock Venom Power Ragnarok GTS 245/30R20 at $105 each in 245/30R20, and more 245/30R20 tires through the tire search.

Searching for 245/30R20 tires on a Audi TTS Quattro, or the right tire size for 20x9 +42 wheels? This is one owner's proven combination, and every wheel and tire package we sell ships mounted, balanced and ready to bolt on.

Suspension, stance and clearance

This Audi TTS Quattro is on stock suspension, so the ride height is factory and the fitment you see here works without lowering the car.

No rubbing at all, front or rear, no spacers, no fender work. That means the setup fits as-is, which is what most owners want to know before they buy.

Stance: nearly flush. The wheel face sits a touch inside the fender line. Flush fitment on a Audi TTS Quattro comes down to the offset and width above; copy them and you get the same result.

Will 20x9 +42 fit a Audi TTS Quattro?

Will BC Forged HCA 20x9 +42 fit a 2011 Audi TTS Quattro? This owner's answer is yes, with no rubbing.

6 other Audi TTS Quattro builds in the gallery run sizes like 18x9.5, 19x8.5, 18x8.5, 18x9, 18x8, so you can compare offsets, tire sizes and suspension before you order. See all Audi builds.

Our fitment guarantee covers wheels bought through wheels that fit the 2011 Audi TTS Quattro: pick the car, and every size shown is one we have checked for bolt pattern, hub bore and clearance.

Buy the same wheels and tires for your Audi TTS Quattro

BC Forged HCA is not something we carry today. For the same look on your TTS Quattro, browse wheels that fit the 2011 Audi TTS Quattro in 20-inch sizes near +42 offset; the Audi TTS Quattro wheel and tire packages there ship mounted and balanced.

Financing is available on every set, and 2011 Audi TTS Quattro wheels ship free when bought as a wheel and tire package.

About this build

Every car in the Threepieceus gallery was submitted by its owner or collected from real builds, with the wheel size, offset, tire size, suspension and clearance recorded as fitted. Check two or three builds with the same Audi TTS Quattro and size before you order, and add your own ride once it is done so the next owner can see what fits.